Mowrey's AZO in Camera

holmburgers

Member
Joined
Aug 13, 2009
Messages
4,439
Location
Vienna, Austria
Format
Multi Format
Here are the results of shooting an emulsion made in October at the GEH workshop with Ron Mowrey and Mark Osterman, in a camera.

One coating was done on subbed-melinex and the other on strathmore bristol paper, I believe.

Shot on a sunny day at 4 in the afternoon; Pentax spotmeter read 16 on the stone and 13.5 on the roof, indicating an exposure of 14 for me.

f/32

60 seconds for the paper
70 seconds for the film (got distracted...)

All told, I'm really digging this! The paper negative came out very strong and the neg seemed thin, though there's plenty of information on there, just not a lot of density. I'm quite curious about this..

My plan is to make a carbon print from the paper neg; a gift for my friends who were married in this building about a year ago.

However, the paper grain hides the resolution of this emulsion, which on the film is dang impressive. Coating flaws detract from it, but hey.. cut a guy some slack.

No matter what happens to film production, I know how to make this... and that makes me so happy.

*picture 1* - detail from film
*picture 2* - film negative
*picture 3* - positive from film neg
*picture 4* - paper neg
*picture 5* - positive from paper neg

The positives are just flipped scans, not prints.
 

Attachments

  • Azo Paper Neg.jpg
    451.3 KB · Views: 199
  • Azo Paper Neg Positive.jpg
    451.4 KB · Views: 240
  • Azo Film Neg Trans.jpg
    215.8 KB · Views: 196
  • Azo Film Neg Pos.jpg
    282 KB · Views: 218
  • Film neg close up detail.jpg
    85.6 KB · Views: 216
OP
OP

holmburgers

Member
Joined
Aug 13, 2009
Messages
4,439
Location
Vienna, Austria
Format
Multi Format
Maybe Ron's reading this and can shed some light...

I remember a cautionary note about coating this emulsion on film; since it's non-absorbent the excess salts(?) won't absorb down into the fibers. One result is crystallization, but what else might that do?

In person, the paper negative is much denser than the film. Why might this be, considering that the exposures were approximately equal and even a bit longer on the film?
 

yeknom02

Member
Joined
Feb 4, 2010
Messages
312
Location
Detroit
Format
Multi Format
I would just like to express my envy... Some day I will be able to take one of those workshops...
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…