the point seems to be to have bulletproof negatives and make contact prints.But how to adjust the cotnrast if the contrast range of the scene ist for instance 2 stops?
It really isn't complicated.
Flat light.
Slight underexposure to 'create'/ deepen a shadow.
Bracket widely.
Process for a high enough CI to place your neg onto your preferred grade of paper, with allowance for Mortensen's optical system having more flare than today. Mortensen attempted to use various developers that would eventually run out of steam (ie reach 'gamma infinity') at around the desired contrast - along with what he thought (without any real analytical backup) was some degree of 'compensation' of tonal values.
Make your print, then subject it to various procedures, possibly including paper neg steps, to turn it into something that is very desperate to pretend it isn't a photograph.
That's about it.
Oh, and Mortensen used 120 rollfilm, not individual sheets.
Hi Oliver,Hello,
I don't get the steps required for making a correct 7D negative.
7D negative means measuring the lights and underexpose and overdevelop the film.
If a scene has a contrast range of 3 stops how do I adjust the eposure?
Do I have to underexpose by 2 stops (400 ISO box speed film exposed with 1600)?
But what about measuring the lights? If I measure the lights with the light meter (== Zone V) with the ISO 1600?
The I would have 4 stops underexposure if the light would be Zone VII in real but measured with Zone V.
etc.
I hope you can give me some advice.
Oliver
He did explain that for outdoor portraits very diffuse light or very directional sunlight were not good for his procedure.
https://archive.org/details/outdoorportraitu00mort_0/mode/2up
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?