Metering modes in eos10?

[Fredrixxon]

Is it possible to select between? Google won't answer, I got confused.

 

[koraks]

It should be. It has two metering modes: evaluative and partial.
Having a look at the manual, I think the camera operates in evaluative mode by default, but the user can engage partial metering at the press of the dedicated button under the right thumb:

IDK whether this toggles the metering mode, or whether partial metering is only engaged as long as the button is pressed. If you give the manual a thorough read, you will likely find a hint somewhere about its operation.

Hope this helps!

 

[Fredrixxon]

If that was just that simple ... Unfortunately, can't find a single word on metering modes in manual, the button you circled is to change f - number

 

[koraks]

the button you circled is to change f - number

Its explicitly labeled to be about partial metering mode. The button's function may change in accordance with the picture taking mode. Have you verified this?

 

[Molli]

Funnily enough, the index for the manual at Butkus.Org lists information about Partial Metering as being on Page 55:

The only page missing!

Here it is from Flynn's Graphics:

The manual in its entirety is here:

https://flynngraphics.ca/wp-content/uploads/2016/04/EOS-10s-Manual.pdf

 

[koraks]

The only page missing!

Good detective work! This explains it. Also not this remark which I had already suspected:

 

[Fredrixxon]

Oh, I see. It does not work in manual mode too. Thank you