Medalist question

westfi1

Member
Joined
Jun 1, 2006
Messages
10
Format
35mm
I recently bought a Kodak Medalist ll from 1946. It didn’t come with the case. When these cameras were purchased new, did they come with a neck strap for just the camera, or only with the case with attached neck strap ? If I buy a case for it, can the neck strap be removed from the case and attached directly to the camera ? Thanks everyone !
 
  • blee1996
  • Deleted
  • Reason: Wrong info

Hunter_Compton

Member
Joined
Nov 20, 2019
Messages
248
Location
Oxford, MI
Format
Analog
Both the Medalist I and II have strap lugs on the body, and there were strap lugs on the case, so you can put the strap wherever you like.

I don't see why you would need the original strap, in fact I don't know if I would trust 70 year old leather with a camera this heavy.

 

Dan Daniel

Subscriber
Joined
Jul 4, 2009
Messages
2,920
Location
upstate New York
Format
Medium Format

I don't know what was in the box when new. I do know that the case does have lugs for straps. That most have a leather strap attached to these lugs. And that the strap is held on by a loop through the lug that is riveted close. So you can't use the original strap elsewhere without some destruction and construction.

And I'm with Hunter-Compton that old leather straps are dangerous, as my first Rolleicord demonstrated by falling to the sidewalk one day with the force of stepping off a curb in NYC. blee196 is not alone in having them fail. Whether you use the strap lugs on the case or on the camera, use a more recent strap itself.
 

Saganich

Subscriber
Joined
Nov 21, 2004
Messages
1,279
Location
Brooklyn
Format
35mm RF
The 'original' leather straps no matter how good they seem are just an accident waiting to happen, as Dan mentioned. Some cases allow you to attach new leather or nylon strap through the existing riveted loops around the bottom where there is an additional loop, and back up the other side (see example). The leather loops on the case shouldn't only be holding up the camera because the loops will fail as well. On my Medalist I use a old-school wide strap (like a guitar strap) attached to the strap lugs on the body.
 

Attachments

  • s-l1200.jpg
    148.8 KB · Views: 40
OP
OP

westfi1

Member
Joined
Jun 1, 2006
Messages
10
Format
35mm
@Hunter_Compton : Please forgive me for interrupting this thread, but I don’t know how else to contact you. I don't know if you are still compiling Kodak Chevron camera serial numbers , but if you are, I have two for you. I just bought a mint Chevron. The body serial number is 001009, and the lens serial number is RM263. As I recall, this body serial number is lower than the lowest one you mentioned on your Photrio post . . .
 
Last edited by a moderator:

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,271
Location
Delta, BC Canada
Format
Medium Format
Medalist related post moved to this thread.
 

Hunter_Compton

Member
Joined
Nov 20, 2019
Messages
248
Location
Oxford, MI
Format
Analog
Yes, that would be the earliest body serial I have now, the next lowest being 001018

It still supports my assertion that Chevron body serials were started at 001000 and mated with separately serialized lenses.

Also, not technically a Medalist, but close enough.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…