For Sale Massive darkroom and processing clearout sale

[bjsmith7474]

I'm clearing out tons of darkroom equipment. The prices below are just starting points...feel free to give me offers! The more you buy...the more I'll deal.

Now the bad news...I’m willing to ship the lighter and more expensive items but I’d really prefer pickup on the heavier big stuff (big easels, big trays, etc...) Maybe if the stuff doesn't go quickly enough for me I'll think harder about shipping it, but sometimes it's just too difficult. If you’re in the Washington, DC, area feel free to come by and look. I’m flexible and motivated to get rid of this stuff, so ask me anything!


Also, I have at least six enlargers I’m also looking to move....these include

1. Omega D5 $120
2. Belfort Instruments 4x5 enlarger (Omega D2 XL clone, uses Omega parts and looks even better built than the Omega to me) $70
3. Omega B8 (mint, and yes, I really mean it....doesn’t look used ever and comes with tons of accessories in the original boxes) $140
4. Omega B8 $50
5. Nikkor 6x7 dichroic $40
6. Minolta II $50
7. Minolta III $50
8. Omega C700 dichroic (with condenser head also) $80

16mm, 35mm, 120 (medium format) plastic processing tanks $3-$8 each (depending on brand, jobo, ansco and paterson available)
plastic reels $1 ea

stainless steel tanks with lids $2-$10 ea (generic, nikor, omega, kindermann available in single, doubles and quads. Also available is a giant Nikor tank that will fit 8 rolls of 120 at once that’s a bit more expensive, $35)
generic 35mm stainless steel reels $.75 ea (nikkor, kindermann, and a few hewes also available)
generic 120 stainless steel reels $1 ea
16mm Kindermann stainless steel reel $14
Nikor 4x5 development tank (bottom only and it needs a good cleaning!) $15

plastic and pyrex measuring graduates, flasks, etc $1-$2 ea
plastic storage containers $.50 ea

11x14 trays (set of 3) $11
11x14 porcelain enamaled shallow tray $10
8x10 trays (set of 3) $7
plastic, hard rubber, and metal trays also available in smaller and biggers sizes (great for sheet development or small prints)

canned air nozzles $1 ea.

contrast filter sets for enlargers (kodak, ilford, etc in 3x3 and 6x6 sizes) $4-$10 set
kodak projection print scale $3 ea
grain enlargers $5-$40 (omega micromega, paterson, magnasight)

safelights $3-$10 (small) $20-$50 (large, thomas duplex, kodak 10x12, etc)

4x5 processing hangers $.50 ea
4x5 stainless steel developing tank $8
4x5 / 5x7 stainless steel developing tank set (5 tanks, plus larger tank to set them in and create a water bath, all by calumet) $60
4x5 FR cut film daylight development tank $20

timers $5-$15 ea (gralab, mark time)
Lektra TM-8 solid state timer $50

contact printers for 120 $4 ea (in box)
four in one easels $4 ea.
Bogen 11x14 2 blade easel $12
Beseler 11x14 borderless easel (in box) $12
Kostiner 20x20 easel $70
Saunders 11x14 four blade easel $20-$40 ea.

Cibachrome color processing drum motorized base (in box) $15

horizontal 11x14 print washer $10
horizontal 11x14 stainless steel print washer $15

35mm bulk film loaders (watson, alden, etc) $4 ea

Also available are tongs (stainless and plastic), thermometers, squeegees and any number of other small accessories. Just ask! It all needs to go.

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[RPippin]

Could use the Thomas safelight. Let me know if it is still available. I have a friend in Alexandria who could pick it up for me.

 

[jpa]

Interested in the Gralab timer, if you're willing to ship it. Let me know. Thanks.

 

[JohnMeadows]

Would you be willing to ship the Nikor tank (the one for $35) plus 4 reels, plus the 4x5 development hangers and tanks to Toronto Canada?

Cheers,

John

 

[John Koehrer]

I'm down for the Ciba motor base if available

 

[willrea]

I'd be interested in one of the timers

 

[Newt_on_Swings]

Pm sent for grain enlarger!

 

[AndyB.]

PM sent for various bits.

 

[lbloom]

PM sent.

 

[tribalista000]

Hi! Quick question, for the Omega B8 would you recommend that for a first timer?

 

[engineerchris]

If you will ship, I would take some 35 mm bulk loaders, plastic dev tanks and reels.

 

[adam h]

I'm clearing out tons of darkroom equipment. The prices below are just starting points...feel free to give me offers! The more you buy...the more I'll deal.

Now the bad news...I’m willing to ship the lighter and more expensive items but I’d really prefer pickup on the heavier big stuff (big easels, big trays, etc...) Maybe if the stuff doesn't go quickly enough for me I'll think harder about shipping it, but sometimes it's just too difficult. If you’re in the Washington, DC, area feel free to come by and look. I’m flexible and motivated to get rid of this stuff, so ask me anything!

Hi, does the Cibachrome motorized base work to process film, using a Jobo drum?

Also, I have at least six enlargers I’m also looking to move....these include

1. Omega D5 $120
2. Belfort Instruments 4x5 enlarger (Omega D2 XL clone, uses Omega parts and looks even better built than the Omega to me) $70
3. Omega B8 (mint, and yes, I really mean it....doesn’t look used ever and comes with tons of accessories in the original boxes) $140
4. Omega B8 $50
5. Nikkor 6x7 dichroic $40
6. Minolta II $50
7. Minolta III $50
8. Omega C700 dichroic (with condenser head also) $80

16mm, 35mm, 120 (medium format) plastic processing tanks $3-$8 each (depending on brand, jobo, ansco and paterson available)
plastic reels $1 ea

stainless steel tanks with lids $2-$10 ea (generic, nikor, omega, kindermann available in single, doubles and quads. Also available is a giant Nikor tank that will fit 8 rolls of 120 at once that’s a bit more expensive, $35)
generic 35mm stainless steel reels $.75 ea (nikkor, kindermann, and a few hewes also available)
generic 120 stainless steel reels $1 ea
16mm Kindermann stainless steel reel $14
Nikor 4x5 development tank (bottom only and it needs a good cleaning!) $15

plastic and pyrex measuring graduates, flasks, etc $1-$2 ea
plastic storage containers $.50 ea

11x14 trays (set of 3) $11
11x14 porcelain enamaled shallow tray $10
8x10 trays (set of 3) $7
plastic, hard rubber, and metal trays also available in smaller and biggers sizes (great for sheet development or small prints)

canned air nozzles $1 ea.

contrast filter sets for enlargers (kodak, ilford, etc in 3x3 and 6x6 sizes) $4-$10 set
kodak projection print scale $3 ea
grain enlargers $5-$40 (omega micromega, paterson, magnasight)

safelights $3-$10 (small) $20-$50 (large, thomas duplex, kodak 10x12, etc)

4x5 processing hangers $.50 ea
4x5 stainless steel developing tank $8
4x5 / 5x7 stainless steel developing tank set (5 tanks, plus larger tank to set them in and create a water bath, all by calumet) $60
4x5 FR cut film daylight development tank $20

timers $5-$15 ea (gralab, mark time)
Lektra TM-8 solid state timer $50

contact printers for 120 $4 ea (in box)
four in one easels $4 ea.
Bogen 11x14 2 blade easel $12
Beseler 11x14 borderless easel (in box) $12
Kostiner 20x20 easel $70
Saunders 11x14 four blade easel $20-$40 ea.

Cibachrome color processing drum motorized base (in box) $15

horizontal 11x14 print washer $10
horizontal 11x14 stainless steel print washer $15

35mm bulk film loaders (watson, alden, etc) $4 ea

Also available are tongs (stainless and plastic), thermometers, squeegees and any number of other small accessories. Just ask! It all needs to go.

Hi, will this motorized base work to process film, using a Jobo tank?

 

[SkipA]

I'd like to know a little more about these, brand, dimensions, whether prints are separated, etc.

horizontal 11x14 print washer $10
horizontal 11x14 stainless steel print washer $15


Thanks

 

[2F/2F]

PM sent on Lektra timer. If it is still there, I want it!

 

[nhemann]

PM sent on the Saunders 11x14 4-blade and a gralab timer if any are left

 

[greenrhino]

pm sent

 

[Athiril]

Can I have 3 x 35mm bulk loaders.

1 x 16mm tank with reel (really need this).

Whats the largest 120 tank size you got?


PM sent

 

[bjsmith7474]

Just a quick note. I've gotten tons of response on the ad, but I got called out of town at the last minute for work unexpectedly til late Sunday. So, I apologize for the delay, but don't worry I'll get back to you. It just might take an extra day or two. I thought I'd be packing stuff this weekend and not working up in NY!


Brad

 

[bjsmith7474]

Ok, I'm back in town...tons of stuff left!

 

[2F/2F]

I definitely would like the Lektra timer after looking up the ratings for that model. It is exactly what I need, and I want a solid state version.

 

[trbajaz]

I'm in Arizona, would like to purchase the cibachrome motorized base. My zip is 85711 for shipping. Also interested in the omega d5, but shipping that might be hard to accomplish. I recently purchased an extended d5 but the seller shipped very strangely and I do not have the standard, disappeared in shipment. Thus my concern about shipping. The Belford sounds interesting also.My phone number is 520-571-0299, feel free to call in the morning. Thanks, Ted

 

[Leigh B]

I'm interested in some good filter funnels.

Please let me know if you have any. I'm on the north side of the DC beltway.

- Leigh

 

[bjsmith7474]

Updated list!

QUOTE=bjsmith7474;1190508]I'm clearing out tons of darkroom equipment. The prices below are just starting points...feel free to give me offers! The more you buy...the more I'll deal.

Now the bad news...I’m willing to ship the lighter and more expensive items but I’d really prefer pickup on the heavier big stuff (big easels, big trays, etc...) Maybe if the stuff doesn't go quickly enough for me I'll think harder about shipping it, but sometimes it's just too difficult. If you’re in the Washington, DC, area feel free to come by and look. I’m flexible and motivated to get rid of this stuff, so ask me anything!


Also, I have at least six enlargers I’m also looking to move....these include

1. Omega D5 $120
2. Belfort Instruments 4x5 enlarger (Omega D2 XL clone, uses Omega parts and looks even better built than the Omega to me) $70
4. Omega B8 $50
5. Nikkor 6x7 dichroic $40
6. Minolta II $50
7. Minolta III $50
8. Omega C700 dichroic (with condenser head also) $80

16mm, 35mm, 120 (medium format) plastic processing tanks $3-$8 each (depending on brand, jobo, ansco and paterson available)
plastic reels $1 ea

stainless steel tanks with lids $2-$10 ea (generic, nikor, omega, kindermann available in single, doubles and quads. Also available is a giant Nikor tank that will fit 8 rolls of 120 at once that’s a bit more expensive, $35 and a Kindermann tank with a flat top that will fit 7 rolls of 35mm at once. $25)
generic 35mm stainless steel reels $.75 ea (nikkor, kindermann, and a few hewes also available)
generic 120 stainless steel reels $1 ea
Nikor 4x5 development tank (bottom only and it needs a good cleaning!) $15

plastic and pyrex measuring graduates, flasks, etc $1-$2 ea
plastic storage containers $.50 ea

11x14 trays (set of 3) $11
12X15 trays (set of 3 paterson) $15
11x14 porcelain enamaled shallow tray $10
8x10 trays (set of 3) $7
plastic, hard rubber, and metal trays also available in smaller and biggers sizes (great for sheet development or small prints)

canned air nozzles $1 ea.

contrast filter sets for enlargers (kodak, ilford, etc in 3x3 and 6x6 sizes) $4-$10 set
kodak projection print scale $3 ea
grain enlargers $5-$10 (voss, paterson, magnasight)

safelights $3-$10 (small) $20 (large, kodak 10x12, etc)

4x5 processing hangers $.50 ea
4x5 stainless steel developing tank $8
4x5 Yankee utility developing tank $3 (no lid)
4x5 / 5x7 stainless steel developing tank set (5 tanks, plus larger tank to set them in and create a water bath, all by calumet) $60
4x5 FR cut film daylight development tank $20

timers $5-$15 ea (gralab, mark time, time o lite)

four in one easels $4 ea.
Bogen 11x14 2 blade easel $12
Beseler 11x14 borderless easel (in box) $12
Kostiner 20x20 easel $70
Saunders 11x14 four blade easel $20-$40 ea.

35mm bulk film loaders (watson) $4 ea

Paterson 9 inch thermometers (in box with case) $15 ea.
Kodak Process type 2 thermomter (in box) $20
Dial thermometers $4 ea.

Also available are tongs (stainless and plastic), squeegees and any number of other small accessories. Just ask! It all needs to go.[/QUOTE]

 

[bjsmith7474]

bump.

 

[bjsmith7474]

anyone else? Except for the enlargers I'm sure we can figure out a way to ship stuff out. I'm pretty motivated to get my "collection" down.

Also, I do have a few more things I found.

Gralab model 171 $25
Kodak 8x10 OC filter (in box) $7
Kodak Model C safelight (with OC filter) $20
Beseler 45 negative carrier - minox $30
Beseler 45 negative carrier - 110 $15

I have other negative carrier for Omega and Beseler, too.. Feel free to ask. Most are $5-15.