Up for sale is a Mamiya RB67 ProS kit that includes the following.
- RB67 ProS body w/ WLF.
- 90mm K/L lens
- 180mm K/L lens
- Extension tubes (#1 and #2)
- Left hand grip
- 3 120 ProS backs. 1 has some spacing issues (I still get 9 good frames per 120 roll) The other 2 have exhibited no problems (KEH BGN)
- Pola back.
- Printed manual (from PDF) and some pre-cut foam seals that fit the back(s). I replaced the seals on the #1 back, but the two I got from KEH came with seals in good condition.
I've bought most of this from APUG and KEH over the course of about a year. I absolutely love love love the image quality and negative size of this camera, and I actually like the ergonomics quite a bit. But too much of the shooting I've been doing lately is of my kids, and it's hard to handhold this camera any sharp shots of a set of jubilant twins.
Only issue I've found with the camera is that the mounting flange on the 90mm is a little out of round, so it's harder to mount than the 180. It does mount properly however, and doesn't affect the operation of the camera in any way. And as noted above, one of the backs has some spacing issues, but the other two have had no issues to date.
Looking to get $450 plus actual shipping. Due to the weight, I'm guessing it'll be around $30 to CONUS. I'll eat the Paypal fees, if applicable.
PM with questions.
- RB67 ProS body w/ WLF.
- 90mm K/L lens
- 180mm K/L lens
- Extension tubes (#1 and #2)
- Left hand grip
- 3 120 ProS backs. 1 has some spacing issues (I still get 9 good frames per 120 roll) The other 2 have exhibited no problems (KEH BGN)
- Pola back.
- Printed manual (from PDF) and some pre-cut foam seals that fit the back(s). I replaced the seals on the #1 back, but the two I got from KEH came with seals in good condition.
I've bought most of this from APUG and KEH over the course of about a year. I absolutely love love love the image quality and negative size of this camera, and I actually like the ergonomics quite a bit. But too much of the shooting I've been doing lately is of my kids, and it's hard to handhold this camera any sharp shots of a set of jubilant twins.
Only issue I've found with the camera is that the mounting flange on the 90mm is a little out of round, so it's harder to mount than the 180. It does mount properly however, and doesn't affect the operation of the camera in any way. And as noted above, one of the backs has some spacing issues, but the other two have had no issues to date.
Looking to get $450 plus actual shipping. Due to the weight, I'm guessing it'll be around $30 to CONUS. I'll eat the Paypal fees, if applicable.
PM with questions.