I just purchased an RB67 Pro S with Pro SD 6x45 back attached. When I rotate the back, there is no click to hold it in the rotated position (neither landscape nor portrait clicks in place). Any suggestions would be appreciated.
I just purchased an RB67 Pro S with Pro SD 6x45 back attached. When I rotate the back, there is no click to hold it in the rotated position (neither landscape nor portrait clicks in place). Any suggestions would be appreciated.
Worthy of note; the click spring isn't in the film carrier, but in the revolving adapter ("P mount" as I recall). This is a replaceable part (you'd remove it, for instance, to mount an Instax back). Try revolving it without the roll film carrier mounted to confirm.