Mamiya RB67 Pro-S and Pentax flash FGZ-360

Hello,
I hope someone knows if there is any possibility to connect Mamiya RB67 and flash Pentax 360FGZ.
If possible, what do I need to do this?

Thanks

I'm not familiar with this flash so I can only tell you what I did with mine. I have a Stroboframe that I use with my RB67. There is a mount on the side for a flash, but I like the Stroboframe much more. I went on E-Bay and bought an adapter to go from a sync cord to the flash unit and a sync cord. The flash mounts on the adapter and the adapter mounts on the Stroboframe. The sync cord goes between the lens and the adapter.

This setup should work with any flash unit. Mine happens to be a Quantaray QDC 900WA, made for Canon ETTL, used in the manual mode.

I use an 'antique': SOLTRON D32T, mount on the side and use in 'Auto' (High and Low). This Unit has a sync cord that I connect to the camera.

Thank you for your answers. First I will try only with flash unit and sync cord. If everything works, I wouldn't be a bad idea to buy a Stroboframe, it seems to be a very usefull thing.

I believe that Pentax has an extension cord (PC to Shoe) that they made for 360 flash unit - I recall using one with a Pentax 645.