Mamiya RB67,Graflex RH50 back.

MediumFormat2016

Member

Joined

Jan 24, 2015

Messages

6

Location

Dayton,Ohio

Format

Multi Format

• Jan 24, 2015

• #1

I have just recently got a Graflex RH50 back,and can't figure out how it's supposed to fit on my RB67 or if it will even fit at all.

 

shutterfinger

Member

Joined

Feb 25, 2013

Messages

5,020

Location

San Jose, Ca.

Format

4x5 Format

• Jan 24, 2015

• #2

The RH50 was made for the Graflex XL. If yours has the plate with guide pins remove the plate and it should fit like your RB film holder.
http://www.cameraeccentric.com/html/info/graflex_2.html

 

OP

OP

MediumFormat2016

Member

Joined

Jan 24, 2015

Messages

6

Location

Dayton,Ohio

Format

Multi Format

• Jan 24, 2015

• #3

Yes mine does have the guide pins, and I have taken the Xl Plate off. But it dosen't fit with or without the revolving back.

 

shutterfinger

Member

Joined

Feb 25, 2013

Messages

5,020

Location

San Jose, Ca.

Format

4x5 Format

• Jan 24, 2015

• #4

According to this thread it for 4x5 Graflok with the pins removed.
http://www.cameraeccentric.com/html/info/graflex_2.html

I've never worked with the RH50 but do have the factory books on it which say nothing about adapting to other makes of cameras.

 

OP

OP

MediumFormat2016

Member

Joined

Jan 24, 2015

Messages

6

Location

Dayton,Ohio

Format

Multi Format

• Jan 24, 2015

• #5

Well anyways I do appreciate the info.

 

jadphoto

Member

Joined

Nov 14, 2003

Messages

64

• Jan 26, 2015

• #6

If I remember correctly the RH50 took 70mm film. Do you have a source? If not then I think it's a moot point.

JD

 

OP

OP

MediumFormat2016

Member

Joined

Jan 24, 2015

Messages

6

Location

Dayton,Ohio

Format

Multi Format

• Jan 26, 2015

• #7

I finally figured out that the RH50 back dosen't even fit the RB's. It only fits the Graflex Xl and 4x5 cameras.