I've just processed my first 35mm roll of this film and have some very muddy negs. I loaded and unloaded in pitch black dark, rated it at 80asa, bracketed all exposures and took all shots on a bright sunny day with a red 25a filter on and processed in ID11 neat for 8 mins. A couple of frames are a bit more contrasty than the rest but still pretty muddy. Also both edges of the negs have a bright green line running along that sometimes creeps up into the frame - come to think of it that line corresponds to each edge of the back where it closes on to the body - some kind of IR rays getting in there maybe. But can anyone give me some idea of where I'm going wrong with film rating, chemicals etc. I'm not after that IR 'woody' effect that HIE gives, just after an exaggerated high contrast effect - the only other developers I have to play around with are TMax and Rodinal. I realise IR's a bit of a lucky dip and don't expect a magic bullet but a guiding hand would be a good start. Many thanks, Patricia