Has anyone ever come across a device that would convert the M sync of your average pack film Polaroid to X sync? It doesn't seem like it would be so hard to make something that adds a 20 ms delay so that an electronic flash would fire at the right time, but Google came up with nothing.
M sync converter
-
A
- Thread starter paul ewins
- Start date
Recent Classifieds
-
For Sale FS: Gundlach-Manhattan Hyperion Diffusion 7in f/4 Lens
- Started by B.S.Kumar
-
For Sale FS: Linhof Recessed lens board
- Started by dirkfletcher
-
For Sale Leica M4-2
- Started by chriscrawfordphoto
Forum statistics
-
- RalphLambrecht
- Deleted
Doesn't the M sync fire in advance of the shutter to give flash bulbs a chance to get going? In that case, a delay is what is needed.
Steve.
Steve.
You and the OP are right. Sorry, I got it confused.
Is this of any help: http://www.instantoptions.com/faqs/faqmisc.elecflash.php?
By me removing my original response, this got lost as well:
http://en.wikipedia.org/wiki/Flash_synchronization
http://en.wikipedia.org/wiki/Flash_synchronization
That is basically a work around - bump up the power on the flash to get a longer duration - and so far has been a bit too much trial and lots of error for my liking. I've also got a 360 which has its own dedicated flash but I'll need to get a 240/110 stepdown transformer (for the charger) and replace the nicads in the flash before I even know whether it will work. Other options all involve some sort of hacking which is why I am looking for a plug-in solution before I reach for the Dremel.
You can build a delay circuit, I suppose, or perhaps purchase one pre made. I am sure you could learn how to do it with a visit to the library.
If you like to shoot tons of Polaroids, I would look at Mamiya Universals as well. They are great cameras, and they are pretty light with the Polaroid back (not so much with a film back).
If you like to shoot tons of Polaroids, I would look at Mamiya Universals as well. They are great cameras, and they are pretty light with the Polaroid back (not so much with a film back).
The easiest (but probably not the best) method would be to use the camera's contacts to operate a relay and use the relay's switch contacts to fire the flash. This will probably not introduce enough delay by itself but to increase the delay, I would use something like a 5 volt relay with a 9 volt battery and have a series resistor in line which is similar in value to the resistance of the relay's coil. I would then experiment with connecting capacitors across the coil to delay the turn on time.
Steve.
Steve.
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |