Luna-Pro battery help?

12 A Jutland

D
12 A Jutland

  • 1
  • 0
  • 12
about to extinct

D
about to extinct

  • 3
  • 0
  • 140
Fantasyland!

D
Fantasyland!

  • 9
  • 2
  • 166

Recent Classifieds

Forum statistics

Threads
198,755
Messages
2,780,460
Members
99,698
Latest member
Fedia
Recent bookmarks
2

athanasius80

Member
Joined
Dec 22, 2004
Messages
645
Location
Huntington B
Format
Multi Format
Hey guys,
I just bought a Luna-Pro from a fellow APUGer and was recommended that I could use hearing aid batteries in lieu of Wein Cells. I've popped hearing aid batteries in, and the battery check comes up to half of what it should be.
Any suggestions?
Thanks,
Chris
 

rosey

Member
Joined
Feb 8, 2006
Messages
139
Location
Toledo, Ohio
Format
35mm
athanasius80 said:
Hey guys,
I just bought a Luna-Pro from a fellow APUGer and was recommended that I could use hearing aid batteries in lieu of Wein Cells. I've popped hearing aid batteries in, and the battery check comes up to half of what it should be.
Any suggestions?
Thanks,
Chris

I have two Luna Pro meters. For one of them I actually have a couple still-good original mercury batteries. For the other, I Googled the Luna Pro distributor a few years ago and bought an adapter (in the $20 range) that used the MS76 or SR44 batteries. That Luna Pro reads exactly like the one with the 625 mercury cells.
Are you using hearing aid batteries WITHOUT the adapter designed for them? If so, that's likely the problem.
Rosey
 

Dan Fromm

Member
Joined
Mar 23, 2005
Messages
6,823
Format
Multi Format
Rosey, the hearing aid batteries are zinc-air types, their voltage is close enough to 1.35v for them to replace mercuries and they have the same nice nearly constant voltage until they die. I use 'em in my Minolta Flash Meter (original model, no #), and the only problem is that they don't last long.

Chris, I did have problems with hearing aid batteries, though, the 675s I bought are a bit small and had to be wrapped with stuff so they'd stay in place and make good contact. In addition, they take some time to come up to voltage after their seals are removed. Try again.

FWIW, a similar question came up yesterday. The current price of the adapter for using a pair of SR44s in a LunaPro is around $38. I think that C.R.I.S.' price for their adapter that holds a single SR44 and is the same size as a 625 is $30. Get the good 'un and don't look back. I use one in my LunaPro and it works well.

Cheers,

Dan
 

BrianShaw

Member
Joined
Nov 30, 2005
Messages
16,523
Location
La-la-land
Format
Multi Format
Dan Fromm said:
... FWIW, a similar question came up yesterday. The current price of the adapter for using a pair of SR44s in a LunaPro is around $38. I think that C.R.I.S.' price for their adapter that holds a single SR44 and is the same size as a 625 is $30. Get the good 'un and don't look back. I use one in my LunaPro and it works well.
I, too, got the Gossen adapter (from B&H). It's epensive but the cost only hurts once. I use my Luna Pro all the time and it is extremely accurate.
 

polaski

Member
Joined
Feb 16, 2006
Messages
104
Location
Philadelphia
Format
35mm
Ditto on the Gossen adapter. Google Gossen USA. My Luna Pro S is spot on.
 

RJS

Member
Joined
Jan 4, 2005
Messages
246
Location
Southern Cal
Format
Multi Format
Hi - I've been using Wein batteires for some time with no problems. Is there a difficulty with them? I see B&H is out of the Gossen adapter, but at $40 why not use Wein batteries?
 

Dan Fromm

Member
Joined
Mar 23, 2005
Messages
6,823
Format
Multi Format
RJS said:
Hi - I've been using Wein batteires for some time with no problems. Is there a difficulty with them? I see B&H is out of the Gossen adapter, but at $40 why not use Wein batteries?
One-time capital outlay vs. never-ending operating expense. At $9.00 plus postage a pair from B&H, it doesn't take that long before Wein cells cost more. That's why.

I note that B&H's price today for Wein cells and fixed price auctions on eBay are all well below what Wein cells used to go for. Interesting, any ideas what happened to force the price down?
 

BrianShaw

Member
Joined
Nov 30, 2005
Messages
16,523
Location
La-la-land
Format
Multi Format
plummerl said:
I'll third on the Gossen adapter from B&H. It is perfect.

I'll "fourth" this recommendation. It only hurts the first time you pay the price!
 

Gerald Koch

Member
Joined
Dec 14, 2004
Messages
1,662
Format
Multi Format
It takes anywhere from 30 minutes to an hour for zinc air batteries to come up to full voltage after being unsealed. Also make sure that the air holes are not being covered in any way by either another battery or the cover. They must have unrestricted air access. For certain devices a small hole must be made in the battery compartment cover to provide enough air.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom