LPL/Saunders Column

ozphoto · Jan 12, 2012

Not sure if this has been discussed previously, but I wondered if you can fit a 5x4 LPL enlarger to the 6x7 enlarger column? I know the 5x4 is longer in length, but do the other dimensions allow for them to be swapped out?

I've got a 5x4 head (no column) and a complete 6x7 outfit. I could attach the 5x4 to a wall no problem, but I'm pretty sure, even with a drop shelf system, enlarging would be a pain, due to dimensional limitations. Instead I was thinking of attaching the 5x4 to the 6x7 column and selling off the 6x7 head.

Thoughts anyone? (Open to buying a column if necessary, if anyone has a spare.)

MattKing · Jan 12, 2012

I bet KHB Photografix would be happy to answer your question: http://www.khbphotografix.com/

Newt_on_Swings · Jan 12, 2012

bump... Also interested in this, sometimes i see 4x5 heads from time to time without anything else, would be a cheap option to upgrade for me if this is possible.

Does the 4x5 head come with a separate power brick as well? If it does I dont see those often, might the Achilles heel for me in this situation. I use a 670XL.

ozphoto · Jan 13, 2012

Mine did come with the power pack also. It was from a lab and was attached to the wall via a board behind the head - the column was long gone, or buried somewhere they couldn't find.

If I could pick up a second enlarger for peanuts and just grab the column I'd be happy; then I can eventually unload the 6x7 I currently use, ready for somebody else to use.

KHB is certainly the place to go, but the cost of shipping to AU makes it rather expensive. If it's feasible, picking up a 6x7 enlarger here will be much cheaper than grabbing one from these guys, unfortunately.

Seems such a waste that I may eventually have to butcher a perfectly good enlarger for the part I need . . . . . .

MattKing · Jan 13, 2012

Nanette:

I was suggesting KHB because they could probably answer your question, and because if it were just a question of buying a part, they might be a good source.

ozphoto · Jan 13, 2012

Matt, I've shot off an email already to ask about the column and hoping to hear back some good news. The cost of postage does worry me though - those columns aren't so light. , but fingers crossed, I won't need to buy another column and just be able to fit it to the one I have.

They do have a great range of parts and I'm envious of you guys in Canada - LPL's supplier here in AU, is nowhere near as complete in stock as KHB, and their service is rather woeful. Great to see these guys are supporting the analog world of photography still.

Jon Shiu · Jan 13, 2012

The first version of the 4x5 used the same column as the 670, but later 4x5 versions used a much more massive column. If you look at your 4x5 head and your 670 column, you can compare to see if they fit.

Jon

bdial · Jan 13, 2012

Nanette
What if you got someone to make a column from wood?

If it's helpful, the dimensions of the column on my 4x5 are 10.8 cm wide by 9 cm deep.

Barry

ozphoto · Jan 13, 2012

Barry,

Something I never actually thought of! Will keep that in mind; KBH have got back to me, and the freight will be the biggest problem - it appears that the column is too big for Australia Post, although I will confirm with them, otherwise it'll be a courier service - ouch!!

ozphoto · Jan 15, 2012

Seems it won't fit a 6x7 column without some DIY; waiting to hear how much a column will set me back - my bank account is trembling already.

ozphoto · Jan 18, 2012

An update today - will need to purchase a column and counterbalance as the dynamics of this enlarger are not compatible with their 6700/7700 series, even if you did some great DIY.

Now I just need to factor in shipping costs to see how I fare. . . . . . . .

LPL/Saunders Column

ozphoto

MattKing

Moderator

Newt_on_Swings

ozphoto

MattKing

Moderator

ozphoto

Jon Shiu

bdial

ozphoto

ozphoto

ozphoto

LPL/Saunders Column

Moderator

Moderator

Privacy & Transparency

Privacy & Transparency