LPL Replacement Parts

bwoolam · Jun 2, 2006

I have two LPL 4500 enlargers and I have had an order in for a replacement for my light mixing box for over 7 months. Have talked to marketing people at Omega-Satter with little satisfaction. They tell me that ships come over from Japan every 3 months and no parts like this are stocked in US. Have been looking on eBay with no results. Parts for enlargers and anything film related is like buying antiques now. Are we each going to have to start stocking replacement parts now? Any suggestions on sources for parts like this? Help. bwoolam

hka · Jun 2, 2006

Try JOBO AG at Germany. They are the distributor in Europe.
http://www.jobo.com/jobolab/produkt.html
Or ask Mr. Siegward Schmitz von Lumiere_shop he is a nabour of Jobo AG.
http://www.lumiere-shop.de/

Nick Zentena · Jun 2, 2006

Are you replacing the whole light box? Or just the sytrofoam ?

bwoolam · Jun 2, 2006

Actually the foam is fine. The light box plexy has a hole in it due to shipping in a move I made of my darkroom. I am thinking about having a piece of plexi made for it but not sure if there are any particular optical color properties to the LPL mixing box plexy. What do you think? Bwoolam

bwoolam · Jun 2, 2006

Thanks HKA. Will give your recommendations a go. Will contact JoBo in Germany. bwoolam

firecracker · Jun 3, 2006

bwoolam said:
Thanks HKA. Will give your recommendations a go. Will contact JoBo in Germany. bwoolam

Japan's LPL site is:

http://www.lpl-web.co.jp/

emailartcenter@lpl-web.co.jp

tel: 011-81-4-2951-7037 (very new and not listed on the website)

However, according to the website, it says all the techinical quesitons on the products already purchased are only taken by phone calls. And there's a chance that they might not respond to anyone speaking in English language on the phone.

So, the best bet is to email them first with a very simple letter to explain what you need and then make a phone call later if they tell they can give you some assistance.

If that doesn't work out I'll check it for you. Just PM me with the details of your question(s).

Also, if your replacement parts contain electrical parts (plugs, etc), make sure that you can use them in your country with a proper voltage. You will need to ask for the export model(s) to match if that's an issue.

But try the one in Germany first if that's more convenient for you.

Nick Zentena · Jun 3, 2006

If you want somebody to fix it KHB might do it. They might even have parts for you. They are the local offical Omega repair site.

http://www.khbphotografix.com/

bwoolam · Jun 4, 2006

I have contacted KHB to see if they have any or know where to get one. Thanks much

bwoolam · Jun 4, 2006

Firecracker thank much. I have e-mailed your source and if I don't hear back I will contact you for help. bill woolam

bwoolam · Jun 4, 2006

Firecracker, e-mail you gave me bounced back but I got this one off of the web site, sales@lpl-web.co.jp and have tried it. So far it has not been bounced back. bill

firecracker · Jun 4, 2006

bwoolam said:
Firecracker, e-mail you gave me bounced back but I got this one off of the web site, sales@lpl-web.co.jp and have tried it. So far it has not been bounced back. bill

Sorry. It's my fault. I misspelled it. For the repair service, it's:

partcenter@lpl-web.co.jp

Or you can try the following, which is for rather general questions:

e-commerce@lpl-web.co.jp

These are the ones from the Japanese LPL site that I know of.

bwoolam · Jun 7, 2006

Firecracker

Thanks for new information. bwoolam

david b · Jun 7, 2006

There are a couple of mixing box chamber things on ebay right now. Which one are you looking for?

bwoolam · Jun 8, 2006

Yes I noted that after someone else also alerted me to them. I am looking for the 4X5 and do have a bid in on that one. thanks for all of you people helping me out. I am desparate straights. hope I get one soon. I miss the printing. bill

LPL Replacement Parts

Privacy & Transparency

Privacy & Transparency