looking for tabletop ra4 processor

[caml]

Hi all

Does anyone have any leads on a tabletop ra4 processor that you are Wollongong willing to offload or sell

Any help is greatly appreciated !

 

[MattKing]

Is "Wollongong" an Australian version of "willing"?

 

[caml]

Is "Wollongong" an Australian version of "willing"?

Is "Wollongong" an Australian version of "willing"?

Lol

 

[MattKing]

Fixed it for you!

 

[Pitotshock]

Not associated with the seller, just saw this ad on facebook marketplace for a Beseler branded processor in GA, super cheap. www.facebook.com/marketplace/item/2083279468508236

 

[AgX]

This is a german made one.


Of the manufacturer there is a successor firm, but I doubt they got spares.

 

[Nicklop]

Life could be so easy with one of those...

 

[btaylor]

Not associated with the seller, just saw this ad on facebook marketplace for a Beseler branded processor in GA, super cheap. www.facebook.com/marketplace/item/2083279468508236

Someone buy this! It is very difficult to find roller transport machines. If have one of these, processes up to 16” wide RA4 prints, 2.5l chemistry required. Dryer is a bonus and probably an easy fix. Missing replenisher cap is a no brainer, I used black painted Gatorade caps to seal mine. It is for color prints of course.

 

[Craig]

One of the Ilford ICP 42 machines will do RA4, as it has adjustable temperature. You might be able to modify a CAP40 machine, but that would be more work.

 

[Pitotshock]

OK here is one even better, Fujimoto for $50. Seriously!
https://www.facebook.com/marketplace/item/710836866750388

 

[lallygram]

Someone buy this! It is very difficult to find roller transport machines. If have one of these, processes up to 16” wide RA4 prints, 2.5l chemistry required. Dryer is a bonus and probably an easy fix. Missing replenisher cap is a no brainer, I used black painted Gatorade caps to seal mine. It is for color prints of course.

I just picked up a Beseler 16 from another seller for $50, looks super clean but needs to be tested and seems to be missing some piping on the side where the power cable exits the unit. Any chance you can share some photos of your setup so I know what I need to replace? I don't want to test the electrical before I've cleared up the leaking ports. Cheers!

 

[btaylor]

I just picked up a Beseler 16 from another seller for $50, looks super clean but needs to be tested and seems to be missing some piping on the side where the power cable exits the unit. Any chance you can share some photos of your setup so I know what I need to replace? I don't want to test the electrical before I've cleared up the leaking ports. Cheers!

Wow, $50- that’s amazing. I think I paid $600 and then had to pay freight- but still, IMO, a bargain. I’ll upload some photos here and see if I can scan the manual and post that as well.

 

[lallygram]

Thanks so much!

 

[btaylor]

Thanks so much!

I am attaching the pdf copies of the Beseler-16 CP Auto Print Processor, I hope they are helpful.

 

[lallygram]

I am attaching the pdf copies of the Beseler-16 CP Auto Print Processor, I hope they are helpful.

This is great, thank you so much!