Looking for something to view my 35mm negatives with

hyphmngo

Member
Joined
May 1, 2013
Messages
11
Location
Rancho Cucam
Format
35mm
Hello all I'm looking for something to view my 35mm negatives with. I came across the Gepe Pro Daylight Slide Viewer 1.8x but I'm not sure if its any good. I'm going to start developing my own B&W film and I want to be able to view them to decide which ones I want to take to the local lab to print.

Any recommendations?
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,970
Location
U.K.
Format
35mm
A light box, and a loupe magnifier is what most people use to evaluate negs. and slides.
 

vpwphoto

Member
Joined
Feb 21, 2011
Messages
1,202
Location
Indiana
Format
Multi Format
I have a nice 4'x18" light box for sale. I'm in Indiana... 100 miles south of Chicago.
$70.
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
A slide Viewer is no bad idea. But typically one would have to modify them to push a film trough easily. An alternative would be a illuminated film cutter with attached loupe (Kaiser).

But as said above, typically a light box and a lose loupe are used.
 

Alan Gales

Member
Joined
Oct 16, 2009
Messages
3,253
Location
St. Louis, M
Format
Large Format
I bought a 24"x16" light box off Ebay for about $30.00 including shipping. It was packed in an oversized box and I think they must have paid close to $30.00 for all the shipping peanuts they used!
 

tkamiya

Member
Joined
Oct 3, 2009
Messages
4,284
Location
Central Flor
Format
Multi Format
I use several methods.

1) Look at contact sheet I made
2) Look at negatives on light box
3) Use loupe with one of above
4) Use a stereo microscope at 10x
5) scan and view on computer

I don't have a one best way. I wish I can make an enlarged contact sheet but I don't have that capability in my own darkroom.
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
What is the idea of using a stereo-microscope?
Or do you mean binocular-microscope?
 

Bill Burk

Subscriber
Joined
Feb 9, 2010
Messages
9,290
Format
4x5 Format
hyphmngo said:
Something like this?

http://www.amazon.com/Artograph-Lig...r_1_11?s=photo&ie=UTF8&qid=1377289065&sr=1-11
Click to expand...


Notice a striking resemblance to something you might be reading this on?

Meanwhile... a binocular microscope... would be stereo in other words.

I have a Bausch & Lomb StereoZoom 4 which I use for retouching negatives because you can see depth where the brush is going...

Thanks for giving me a great idea tkamiya... This weekend I have plans to do some printing... I can mount up that microscope over my light table and "proof" my negatives for sharpness before committing them to paper.
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
A stereo microscope has two lenses (and two eyepieces), giving two perspectives (of 3D matter). A binocular microscope has just one lens, but two eypieces, facilitating viewing (of plain matter).
 

tkamiya

Member
Joined
Oct 3, 2009
Messages
4,284
Location
Central Flor
Format
Multi Format
AgX said:
What is the idea of using a stereo-microscope?
Or do you mean binocular-microscope?
Click to expand...


No, stereo microscope, ie. dissection microscope.... obviously, it being a stereo has no merit in this application.... but a microscope of this type has a wilder field of view and lower magnifications than a regular (compound) microscope. Mine goes down to 10x. It also have a larger transmitting type light source, which is basically a dedicated light box. I also happen to have one handy....

I have an Indian made scope. It's QUITE handy for many things....
 
Last edited by a moderator:

Bill Burk

Subscriber
Joined
Feb 9, 2010
Messages
9,290
Format
4x5 Format
The B&L has two lenses - true stereo. I waited and got a good deal on mine, the prices today seem unrealistic.
 

pbromaghin

Subscriber
Joined
Sep 30, 2010
Messages
3,806
Location
Castle Rock, CO
Format
Multi Format

Les Sarile

Member
Joined
Aug 7, 2010
Messages
3,425
Location
Santa Cruz, CA
Format
35mm
I recommend something like a Carson MV-820 that is both an 8X loupe as well as a 40X microscope.





Of course if you have a bellows setup + slide copier that works too . . .





For scrutinizing the frame of film down to the grain, then you may have to resort to a microscope setup . . .

 

ic-racer

Member
Joined
Feb 25, 2007
Messages
16,544
Location
USA
Format
Multi Format
I use clear negative pages, 8x loupe and light table or box. I use multi-element wide-field 8x Kenko loupe like this:
 

E. von Hoegh

Member
Joined
Sep 14, 2011
Messages
6,197
Location
Adirondacks
Format
Multi Format

Yep, a dissecting microscope is a very handy thing. If you're patient you can sometimes find them very cheaply.
 

Bill Burk

Subscriber
Joined
Feb 9, 2010
Messages
9,290
Format
4x5 Format
Yes, I think I took 3 months waiting and checking the bay ... and I got a very good deal but risked getting garbage by taking the very ugliest... Only needed some scrubbing up, the optics needed a little adjusting. But it turned out I got lucky and then I used an old enlarger column to mount it.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,970
Location
U.K.
Format
35mm
The guy just wants to look at his negatives to see which he likes before he sends them to a lab to enlarge, not a science project.
 
Last edited by a moderator:

Bill Burk

Subscriber
Joined
Feb 9, 2010
Messages
9,290
Format
4x5 Format
Just laying out the options.

A normal 50mm SLR lens makes a very good Loupe as well.

I looked at many negs last night through my B&L StereoZoom 4 last night thanks to this thread.

So if nobody got anything useful from the thread, at least it helped me push forward what I wanted to do last night...
 

E. von Hoegh

Member
Joined
Sep 14, 2011
Messages
6,197
Location
Adirondacks
Format
Multi Format
benjiboy said:
The guy just wants to look at his negatives to see which he likes before he sends them to a lab to enlarge, not a science project.
Click to expand...
Well, he just might want to know if they're sharp or not. And there are many options for that. He may want a good look at the negative only, rather than going to the trouble and expense of having it printed. He may need to sort out whether it's a mushy negative or a sloppy lab that's responsible for an unsharp print...
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,970
Location
U.K.
Format
35mm
And can't you tell with a good loupe and a light box ?
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…