Lith Print Exchange Round 3

sly · Dec 24, 2008

Rachelle, recieved your print yesterday. You put your time in France to good use. Your print has lovely tones through it. Lith exchanges are great for illustrating the breadth of results available with lith.
Can you send technical information about the paper and developer used?

mooseontheloose · Dec 25, 2008

Hi Sly,

I believe I wrote it at the back on the bottom of the print. All prints were done on Foma Chamois 542, in Moersch Easy Lith. I usually used dilutions of 1+25 (or so), plus an additional 100ml of Old Brown. As well, since my darkroom was so cold, I often started hot (around 30-35 degrees) as the developer would cool off too rapidly between prints (even with a water bath to keep it warm). Most of my developing times run between 5-12 minutes, and I usually overexpose by +3 stops. Sorry I can't be more specific than that -- I rarely keep notes (except basic info on the back of prints) and I print very erratically in the darkroom (when it comes to Lith) - often changing between paper types and negatives within one session. Not the best system, I know, but it's worked out well enough up to now. That being said, I hope to be more consistent in the coming year.

Pete H · Dec 28, 2008

Rachelle,

I also received your print on Christmas Eve. What a great Christmas present! I love the browns shading to pink highlights, and the simple but rich composition. And what's through the archway? Something to ponder while enjoying your print.

Thank you!

Pete

rst · Dec 30, 2008

I also got Rachelles beautiful print right after Christmas. Very well done. I like that paper but I have not tried it myself yet.

My prints are drying right now. After a night or two under a heavy book I am going to mount them and send them out early in January.

I intended to send one of my cyclists series. But then I came home yesterday from a postcarders meeting with Ingo and Mick where we visited Ludwigsburg. I rethought about my decision and now you will end up with an image I took yesterday in Ludwigsburg. So although I am the latest in our group, the image I send will be a fresh one

It is also the first time I tried Wolfgang Moerschs Ω-Lith and it did exactly what I wanted it to do.

Cheers
Ruediger

mooseontheloose · Dec 30, 2008

Lillian, Pete, and Ruediger,

Thanks for all your comments. I love the chamois paper by Foma, although learned through a lot of trial and error that it doesn't work for every image. Not that it matters anymore, since it's been discontinued ...although I do have some of the new 532 II waiting to be tested.

Lillian -- I love your print of the Matsutake mushroom. You've done an amazing job of keeping all the delicate details intact and the choice of paper really suits the subject.

Pete H · Jan 8, 2009

Lillian, Rachelle, and Ruediger,

Finally I got my prints into the post today. I'm sorry they're late!

Wishing you all the best for the new year

Pete

rst · Jan 14, 2009

Pete H said:
Lillian, Rachelle, and Ruediger,

Finally I got my prints into the post today. I'm sorry they're late!

Wishing you all the best for the new year

Pete

Hi Pete,

I got your wonderful print a few days ago. Sorry for commenting so late but I was busy.

So I am the last in our group to send the prints They are ready and will go out later today. I hope you will like it.

Cheers
Ruediger

Pete H · Jan 19, 2009

Hi Ruediger,

Today a beautiful surprise was waiting for me at home.

I like the way that the slats in the back of the bench continue the pattern of the wall behind, and the narrow depth of field. What is through the gate? It invites the viewer to speculate.

You've done a good job of taming the orangeness of the paper too. Perhaps I should try your recipe.

Many thanks!
Pete

mooseontheloose · Jan 19, 2009

Pete,

I received your print of the eider duck today. I love the almost graphic quality of the image and the gold toning really enhances the effect. I've tried the Kentona but have yet to find a way to work with it that suits my sensibilities -- your image has inspired me to try it once again.

rst · Jan 20, 2009

Thanks for your kind comment Pete. Well, the longer I compare the orange one and the one I sent, the more I think that I should have sent the orange one. Too bad.

When participating in print exchanges these days you not only get nice surprises in the mailbox, but also when sending the prints. When I sent them I realized, that the prices for sending prints international decreased. So instead of 8 Euro per print I only had to pay 6 Euro. So hopefully they will make their way to Canada all the same.

Cheers
Ruediger

Stan160 · Jan 22, 2009

I made what I thought would be my three prints for the exchange last week, but after drying noticed that one has a couple of small areas of missing emulsion.

I've been suffering from pain in my shoulder this week, which has put a temporary halt to lith printing - the idea of 10+ minutes rocking a tray is not pleasant at the moment. Not even sure what I did to cause the problem, but a few evenings of watching TV instead of my usual more active pursuits seem to be helping.

Hopefully back to normal soon, but just wanted to post a message so people don't think I've forgotten the exchange.

Ian

mooseontheloose · Jan 23, 2009

Rudiger,

I received your wonderful print today (first time I've held a dry-mount in my hands as well). I really like the contrast of textures and the way the colour of the print invokes the time of day when the picture was taken. I also have Wolfgang's Omega lith waiting to be used, unfortunately I just haven't had the time to try to it out yet. Hopefully, once my work situation calms down a bit, I'll be able to play catch-up in the darkroom.

I really enjoyed this exchange -- it's great to be able to see what other people are doing. Thanks everyone!

mrtoml · Jan 24, 2009

Today I received some wonderful prints from Wolfgang.

I have just printed mine after a long session with unexpected pepper fogging. Had to switch papers and chemistry. Now all is OK.

Should be able to post these out next week.

Travis Nunn · Jan 24, 2009

My new darkroom took a little longer to get working than I thought. I'm hoping that I can get mine out in the next couple of weeks.

Travis Nunn · Jan 24, 2009

Travis Nunn said:
My new darkroom took a little longer to get working than I thought. I'm hoping that I can get mine out in the next couple of weeks.

I just realized I have already sent my prints... Too much Bourbon today I guess...

mrtoml · Jan 31, 2009

My prints finally went off this morning.

mikeg · Feb 9, 2009

Many thanks to mrtoml and to Wolfgang for some amazing prints. A lovely and very topical snow scene from Mark and two superb prints from Wolfgang -- I love those lith photograms. Thank you both very much.

Sorry I'm late. Mine are done and are being flattened. I'll try and get them off tomorrow, as long as the 20cm of snow forecast for tonight doesn't materialise.

Cheers

Mike

mikeg · Feb 21, 2009

My prints went out 10 days ago.

Mike

mrtoml · Feb 22, 2009

I received yours, Mike. It's great - thank you. Those Voigtlander lenses are good aren't they?

mikeg · Aug 21, 2009

Just received two very nice prints from Stan160.

Thanks Ian.

Cheers

Mike

Lith Print Exchange Round 3

Privacy & Transparency

Privacy & Transparency