liquid light and plexiglass?

Schunn99

Member

Joined

Mar 23, 2007

Messages

43

Location

Little Elm,

Format

Multi Format

• Sep 19, 2007

• #1

hey all,

got three questions for all,
How well does liquid light work on plexiglass? Does an image develop well on plexiglass? and is it possible to load plexiglass sheets covered in LL(liquid light) into a view camera?

thanks,
Scott Hunnicutt

 

Valerie

Subscriber

Joined

Jul 22, 2005

Messages

1,195

Location

Magnolia, Tx

Format

Multi Format

• Sep 19, 2007

• #2

I did LL on plexi many years ago. Sprayed the plexi with matt finish polyurethane (to give the LL something to hang on to), coated with LL, exposed, processed. The images were pretty cool looking--20x24--placed on stands so folks in the gallery could walk around them.

However, they have not held up well at all. In one case, walking from an a/ced building to humid outdoors resulted in immediate crackling and wrinkling--image flaked right off the plexi!!!

 

removed account4

Subscriber

Joined

Jun 21, 2003

Messages

29,832

Format

Hybrid

• Sep 19, 2007

• #3

i have done this as well,
but the subbing/binder i used
was minwax urethane
it yellowed over time ...

have done a bunch of glass with it (LL) though,
and used knox blox unflavored jello, worked great ...


yes is it possible to use plexi plates in a view camera, you will
need plate holders and to cut your plexi plates to whatever format you want
to use. film is smaller than the formats, but the plates ARE the format size ...

have fun!

john

 

OP

OP

Schunn99

Member

Joined

Mar 23, 2007

Messages

43

Location

Little Elm,

Format

Multi Format

• Sep 19, 2007

• #4

fixative?

thanks for the answers, that helps. but in the case of the emulsion flaking off, is there some way to put a protective layer over the emulation to keep it from flaking/fading like vanish in woodworking?

does the flaking problem also apply to LL on metal too?
thanks
Scott Hunnicutt

 

Valerie

Subscriber

Joined

Jul 22, 2005

Messages

1,195

Location

Magnolia, Tx

Format

Multi Format

• Sep 20, 2007

• #5

Schunn99 said:

thanks for the answers, that helps. but in the case of the emulsion flaking off, is there some way to put a protective layer over the emulation to keep it from flaking/fading like vanish in woodworking?

does the flaking problem also apply to LL on metal too?
thanks
Scott Hunnicutt

Click to expand...

I am sure there is... at the time I had a deadline to meet with these and ran out of time to experiment. Some smaller pieces (8x10) have survived just fine.