Kodak Series VI filters

Anton Lukoszevieze

Member

Joined

Oct 1, 2006

Messages

383

Format

Analog

• Oct 12, 2007

• #1

Ok,
just bought some Kodak Series VI filters for my Graflex 3x4 Series B camera (which I await with childlike anticipation), I thought they would be threaded, they are not. I have trawled the net, etc. it seems they are drop-in filters. What size adapter/filter holder do I need to mount these filters on my Graflex? Any help gratefully received, and yes Tim in San Jose I would love some 3x4 plates!!!

 

colrehogan

Member

Joined

May 11, 2004

Messages

2,011

Location

St. Louis, M

Format

Large Format Pan

• Oct 12, 2007

• #2

There is a Series VI filter holder which you press on to your lens. It fits around the outside of it.

 

r-brian

Member

Joined

Feb 25, 2003

Messages

721

Location

Albuquerque, NM

Format

DSLR

• Oct 12, 2007

• #3

You will have to measure the outside diameter of the lens and then find a slip-on holder in that size. If the lens is threaded, then you might be able to find a screw-on holder.

You will need the holder and the retaining ring. There are hoods available that take the place of the retaining ring.

 

OP

OP

Anton Lukoszevieze

Member

Joined

Oct 1, 2006

Messages

383

Format

Analog

• Oct 12, 2007

• #4

VI

Thanks everyone.

 

BradS

Member

Joined

Sep 28, 2004

Messages

8,120

Location

Soulsbyville, California

Format

35mm

• Oct 13, 2007

• #5

Harry,
when you figure out what size slip on adapter you need, drop me a PM or email. I have a bunch of old series VI stuff that I'll never use again. If there's something in my stash that you can use...well, I'll let you have it really cheap - if you want.

Brad.