Aerial mapping. Topographic maps were all made from overlapping 9x9" contact prints, and if you used a stereo viewer you could look at the photos and see the landscape in relief. Typical air photos will overlap the next frame by about 50%, that makes the 3d viewing possible and thereby determine heights of land and contours.
EDIT: this Zeiss brochure for an Ariel photography system makes for a fascinating read on an area of photography I never gave a second glance: Dead Link Removed
That broshure already is 22 years old, but basically shows the peak of film survyeing. Most of these cameras were succeeded by digital ones, also laser scanning was introduced. Surveying got more complex.
The same time all that opto-mechanical postprocessing vanished too.
That broshure already is 22 years old, but basically shows the peak of film survyeing. Most of these cameras were succeeded by digital ones, also laser scanning was introduced. Surveying got more complex.
The same time all that opto-mechanical postprocessing vanished too.
I was mostly interested in the GPS oriented grid controller and all the support hardware. I'm sure the camera itself has long been replaced by digital, but it’s still interesting to know how all the support hardware works.