Kodacolor X C-22 Old Film Found

pkerr · Nov 1, 2004

A friend of mine gave me an old Meopta Flexaret VI TLR and inside I found a roll of exposed 120 Kodacolor X.

I've done some searching on processing this and, aside from the Rocky Mountain Company, http://www.rockymountainfilm.com/c22.htm, how would one develope this? I read a few suggestions about developing it in D-76 or other B&W developer to try to at least salvage the silver image. One other company, Dead Link Removed also suggests trying to get good B&W and forget about the color.

Anyone have experience with this.

Thanks

Tom Hoskinson · Nov 1, 2004

Yes, it is possible to develop C-22 in modified C41 chemistry - but with only 1 roll, I don't recommend it.

It is probably safest to develop it as a B&W negative (I would use a compensating developer - not D76). With only one roll (and no possiblility for experimentation) development may be tricky.

Probably easier to just send it to rockymountain.

127 · Nov 1, 2004

The Speedibrews Celer-41 kit claims it can do C22. They basically sugguest deving for about 12 mins at room temperature. I'd suspect that most room temperature compatable C-41 would probably work OK.

I tried it on a roll I aquired and the results were pretty poor, but then it was a 30 year old film - there was something on their, and I could probably have printed something if it had been interesting. The kit cost about 10 pounds, and I used it on a whole bunch of old and out of date films, so it was worth trying.

I wouldn't expect much from it, and wouldn't pay to have it done commercially unless you've reason to believe theres something really special on there.

Ian

Eric Rose · Nov 1, 2004

You could cut the film in half and try one half in Rodinal first to see what comes out.

Brac · Nov 1, 2004

There is also a company in the UK who will process C22 films (any size) to a colour image, but they're not cheap. They are called, surprise surprise, Process C22. Don't have their web address to hand but a search will find them.

Stan. L-B · Nov 2, 2004

I would go for a CA41 development and give it about 10% boost. Or better still, give it a clip test and get the best pssible results at the second dunk!
If you were this side of the pond I would gladly do it for you....Stan. L-B

Tom Hoskinson · Nov 2, 2004

Just a reminder - C22 film emulsions were not designed for high temperature processing like the C41 emulsions are. If you process the film in C41 chemistry it should be with one of the (several available) low temperature C41 processes.

pkerr · Nov 7, 2004

What is the affect of using a "compensating" developer? Someone suggested Rodinal but Refinal is an Agfa compensating developer.

I think I'll cut a few inches from the film and give it a try.

Thanks for your answer.

Tom Hoskinson · Nov 7, 2004

pkerr said:
What is the affect of using a "compensating" developer? Someone suggested Rodinal but Refinal is an Agfa compensating developer.

I think I'll cut a few inches from the film and give it a try.

Thanks for your answer.

I have no experience with Refinal. My choice would be Diafine (or the Diafine substitute formulation posted on APUG threads).

Doing a snip test is a good idea.

pkerr · Nov 14, 2004

Success!

I cut a small piece of the film and put it through some Ilfosol S at 9 minutes. I could see just a tiny smudge so I tried another 2 inches at 15 minutes and saw "a smiling face". Then I did the whole film for 20 minutes and although the whole thing has a dark orange mask, I could see sharp images.

I know this is APUG but, how to share the images, okay I scanned them and here's a sample. Anyone know what year that Oldsmobile is? I tried to see the year on the license plate and my guess is 1975,

http://web.ncf.ca/ac210/photography/kodacolorx.jpg

Tom Hoskinson · Nov 14, 2004

pkerr said:
Success!

I cut a small piece of the film and put it through some Ilfosol S at 9 minutes. I could see just a tiny smudge so I tried another 2 inches at 15 minutes and saw "a smiling face". Then I did the whole film for 20 minutes and although the whole thing has a dark orange mask, I could see sharp images.

I know this is APUG but, how to share the images, okay I scanned them and here's a sample. Anyone know what year that Oldsmobile is? I tried to see the year on the license plate and my guess is 1975,

http://web.ncf.ca/ac210/photography/kodacolorx.jpg

Your jpg is very pixillated - lots of digital processing artifacts. As a consequence, it is virtually impossible to interpret. Try scanning the license plate area alone, as a color image, at a high resolution setting. Don't post process it - just post it on your website "as-is" as an uncompressed jpeg.

Kodacolor X C-22 Old Film Found

Privacy & Transparency

Privacy & Transparency