Jobo CPP2: specs on grease to use?

The power board is now alive and everything seems to be good. The pump was seized due to galvanic corrosion- prob from all the current floating around when the power board was under water . Got that cleaned up and running smooth-ish . The agitation motor seems fine but I was thinking of repacking it with fresh grease. There’s nothing in the service manual that specs the grease so just wondering if anyone has done this and has a recommendation. TIA

Ask Catlabs. I know they supply grease for the cogs, not sure about the motor. Lubrication solves a lot of things.

Check with the Darkroom Doctor http://www.darkroomdoctor.com/ Both he and his wife are knowledgeable.