Jobo atl 2200 ...loss by the cog

[rai]

Saludos, he recibido un JOBO atl 2200, lo he limpiado y probado, todo parece funcionar bien ... pero observo lo que parece una pérdida por la unión del engranaje al elevador. ¿Esto es normal? ¿Alguna solución?
¡¡¡Gracias!!!

 

[EdoNork]

Is it other than English OK here?
¿A qué te refieres con "pérdida"?
¿Sale líoquido al añadirlo a los tambores?
¿Se sale el líquido del tambor durante el proceso?
Acláranos un poco cuál es el problema exacto.

 

[Sirius Glass]

Is it new or used? Tell us where you are located and we may be able to help you find another cog or some other possibilities.

 

[rai]

Hello, sorry for my bad English ... it's a 2200 atl and a 2523 second-hand drum, and the loss is during the pour, during the passage of liquids to the drum or vice versa. The fact is that the bleach stains the heating bath. When the drum is spinning I see liquid through the gears. Can I replace the red seal with a similar size toric joint (o'ring)?

 

[Sirius Glass]

Probably yes, ask http://www.darkroomdoctor.com/ or one of our sponsors whom I cannot remember right now. Someone should recall the name.

 

[MattKing]

CatLabs is the sponsor that Sirius is trying to recall - they are the US distributor I believe.

 

[Sirius Glass]

Matt got it.

 

[rai]

Thanks!!! Gracias!!!

 

[EdoNork]

Does the drum have the red o-ring in the cog?

 

[RauschenOderKorn]

https://lumiere-shop.de/JOBO-Dichtungsring ??

 

[EdoNork]

Yes, that's the o-ring.

 

[rai]

[QUOTE = "EdoNork, post: 2131738, miembro: 39578"] ¿El tambor tiene la junta tórica roja en el engranaje? [/ QUOTE]

Yes!!!

 

[schlger]

My experience with Jobo Autolabs is tat there is always a spill of chemestry, that becomes visible at the white gear wheels and in the water bath, but that does not harm.