bwcontrast
Allowing Ads
Hi All! I have recently acquired a Jobo ATL-1500 with manual but unfortunately no hoses etc. I am trying to set up up with a water pump and would love if anyone can give me advice on their set up with a video or photos of the back connections. The manual diagrams aren't labelled and I am a more visual person, and can't work it out from the manual. I need to buy all the hoses and pump etc.
From the manual it looks like I need to buy:
One rinse water hose:
"The ATL-1500 requires one Rinse-water hose #16171 which is supplied with the unit. The hose has European threading so we've included a brass adapter to convert the threads to standard ¾" "garden hose" type"
Two drain hoses.
"The ATL-1500 processor has two separate drain hoses: one for the rinse water and the tempering bath, and the other for used chemistry. The hoses are approximately 39" (100cm) long and have a diameter of .86 inches (22mm)."
and a water pump with between 15-90psi.
I would really appreciate any help as this really isn't my strength but very keen to set up and get started.
Thank you so much in advance.
From the manual it looks like I need to buy:
One rinse water hose:
"The ATL-1500 requires one Rinse-water hose #16171 which is supplied with the unit. The hose has European threading so we've included a brass adapter to convert the threads to standard ¾" "garden hose" type"
Two drain hoses.
"The ATL-1500 processor has two separate drain hoses: one for the rinse water and the tempering bath, and the other for used chemistry. The hoses are approximately 39" (100cm) long and have a diameter of .86 inches (22mm)."
and a water pump with between 15-90psi.
I would really appreciate any help as this really isn't my strength but very keen to set up and get started.
Thank you so much in advance.