JandC 400 in D76

bmac

Member

Joined

Sep 30, 2002

Messages

2,154

Location

San Jose, CA

Format

Multi Format

• Sep 7, 2004

• #1

Again, looking for experiences with this film / dev combo. Just got my first batch of the film, and am looking for something "not too exotic" to soup it in while I try it out.

Brian

 

Tom Hoskinson

Member

Joined

Mar 7, 2004

Messages

3,867

Location

Southern Cal

Format

Multi Format

• Sep 7, 2004

• #2

Brian, all my experience with this film is with Pyrocat-HD. I would expect it to work ok with D76, but without the ablility to build contrast that a staining developer provides.

 

OP

OP

bmac

Member

Joined

Sep 30, 2002

Messages

2,154

Location

San Jose, CA

Format

Multi Format

• Sep 7, 2004

• #3

Tom, do you use it in a jobo with pyrocat? if so, do you have a starting time / temp? Do you use the time listed on J&C's site?

 

Tom Hoskinson

Member

Joined

Mar 7, 2004

Messages

3,867

Location

Southern Cal

Format

Multi Format

• Sep 7, 2004

• #4

Brian, I use a SS tank with 120 rollfilm and I tray develop the sheet film. The J&C recommendation is 13 minutes at 68F in Pyrocat HD (2:2:100). That is within a minute of my develop time for the 2:2:100 dilution with 5 seconds of gentle agitation per minute. I will check my notes (they are not here with me) for semi-stand dilutions and times.

 

OP

OP

bmac

Member

Joined

Sep 30, 2002

Messages

2,154

Location

San Jose, CA

Format

Multi Format

• Sep 7, 2004

• #5

thanks