jammed OM2n in ziplock

Do-Over Decor

A
Do-Over Decor

  • 1
  • 1
  • 51
Oak

A
Oak

  • 1
  • 0
  • 45
High st

A
High st

  • 9
  • 0
  • 77
Flap

D
Flap

  • 0
  • 0
  • 29

Recent Classifieds

Forum statistics

Threads
199,220
Messages
2,788,079
Members
99,835
Latest member
HakuZLQ
Recent bookmarks
0

Xmas

Member
Joined
Sep 4, 2006
Messages
6,398
Location
UK
Format
35mm RF
Got a nice chrome OM2n #109xxxx in normal Ziploc bag with small bits only missing winder/motor cover handed over for parts some time in '09.

It arrived jammed with base plate off.

Inspection revealed the interlock preventing shutter release was broken and in two parts. Undo two screws and replace from parts OM2n.

Note the part is probably generic from OM1 through to OM2n.

Still would not wind on reliably cause the 1st and second gear wheels were not stopping properly aligned and we're only able to jam.

The stopping position if the second gear is controlled by the 3rd gears stop and start pin.

The third gear travels through 300 degrees and flys back. The end and start positions are controlled by a brass pin on top of the third gear which has a plastic ring spacer on it.

The OM2n was missing the spacer so had a delinquent start and finish. Pig to replace gear so I glued a bit of the ring back, while I source a small O ring to replace for an OEM repair.

Donno why the ring broke up unless the camera was trashed on motor drive.

If you have the base plate off the text should be clear.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom