Is it worth having my cameras CLA'd after period of little use?

St. Clair Beach Solitude

D
St. Clair Beach Solitude

  • 5
  • 2
  • 40
Reach for the sky

H
Reach for the sky

  • 3
  • 4
  • 71
Agawa Canyon

A
Agawa Canyon

  • 3
  • 2
  • 120
Frank Dean,  Blacksmith

A
Frank Dean, Blacksmith

  • 13
  • 8
  • 310

Recent Classifieds

Forum statistics

Threads
198,867
Messages
2,782,216
Members
99,735
Latest member
tstroh
Recent bookmarks
0

Carlb

Member
Joined
May 17, 2006
Messages
22
Format
35mm
I've got a Pentax LX and a couple of Super A's that have been used pretty infrequently over the last 5 years or so :sad:. I intend to remedy that, and was wondering if it would be worth having them CLA'd and getting a general checking over just for good measure.

None of them have been serviced or needed repairs since I bought them (all new) but neither are any of them showing any obvious signs of problems or old age, and I wouldn't say that any of them have been worked excessively or treated roughly.

Thanks, and all thoughts appreciated
 

Ian Grant

Subscriber
Joined
Aug 2, 2004
Messages
23,265
Location
West Midland
Format
Multi Format
Just test them by putting film through them, don't pay for a CLA unless they really do need it and malfunction. Camera servicing is very expensive.

My Pentax's have all had very heavy use & never needed servicing.

Ian
 
Joined
Dec 12, 2004
Messages
2,360
Location
East Kent, U
Format
Medium Format
Should be OK, but deterioration of electronics and rubber seals is more time-dependent than use-dependent. See if you can check the meters against another meter (either handheld or built-in) that you know to be working well, and lightly touch the rubber seals (such as the one under the screen against which the mirror comes to rest) with your finger. If any seals feel sticky or do not rebound when you press them lightly with your finger, they need replacing! As a rough check, open the camera back, place a piece of white paper over the film gate and observe the camera from the front with lenspaper from the front with lens removed when you fire the shutter at various speeds. If you don't see a perfect rectangle, this could indicate that the shutter is tapering (not opening until partway through its travel). If the cameras pass these rough checks, I would agree to shoot a test roll with each before photographing anything important!

Regards,

David
 

Jim Jones

Subscriber
Joined
Jan 16, 2006
Messages
3,740
Location
Chillicothe MO
Format
Multi Format
If a camera works fine in the coldest temperatures you expect to shoot in, use it. If not, it might be time for a CLA. After maybe 35 years some of my Nikon gear is sometimes sluggish.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,970
Location
U.K.
Format
35mm
Cameras are not like cars, and don't need regular servicing in fact it may cause more problems than it cures, "if it ain't broke don't fix it".
I agree with with David, and Ian, just run a test film through them.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom