Inversion lid for Jobo Tanks?

Forum statistics

Threads
199,646
Messages
2,794,658
Members
99,979
Latest member
XhenjiX
Recent bookmarks
0

Fintan

Member
Joined
Jan 29, 2004
Messages
1,795
Location
Ireland
Format
Multi Format
Does anyone know where I can buy an inversion lid for Jobo rotary processor tanks?

Fintan
 

Nick Zentena

Member
Joined
Nov 21, 2004
Messages
4,666
Location
Italia
Format
Multi Format
Your friendly dealer should be able to order one for you. Jobo in the US sells direct so I assume Jobo in Europe does to.

Which tank ? 1500 or 2500? If it's the bigger tank might be cheaper to buy a used tank with the right lid.
 

Bob F.

Member
Joined
Oct 4, 2004
Messages
3,977
Location
London
Format
Multi Format
There does not appear to be a Jobo distributor in Ireland so probably your best bet is either the UK (www.novadarkroom.com) or a Euro-zone country if you prefer to deal in Euros... The red caps are only 4 quid in the UK. Postage will cost more than that, so try a local dealer first - they may be able to order one if they do not stock it.

Cheers, Bob.
 
OP
OP
Fintan

Fintan

Member
Joined
Jan 29, 2004
Messages
1,795
Location
Ireland
Format
Multi Format
thanks

thanks guys, its the 1500 series and I'll try Nova

I hope its available for the tanks with the cog fitted.
 

Nick Zentena

Member
Joined
Nov 21, 2004
Messages
4,666
Location
Italia
Format
Multi Format
Should be a normal spare part. You'll likely get the whole lid without the insert. Make sure you get the rubber cap to. Then remove the insert from the lid you have and put it into the new lid. If you want to use both lids without changing inserts then order one to. Either the film or paper cup.
 

Ed Sukach

Member
Joined
Nov 27, 2002
Messages
4,517
Location
Ipswich, Mas
Format
Medium Format
Fintan said:
Does anyone know where I can buy an inversion lid for Jobo rotary processor tanks? Fintan

I don't think there is one available for lids with fitted cogs. It would be necessary to buy a new lid ... or... If one is really cheap ... ahem!!!

I .... uh .. this cheap person I know ... visited the local hardware store and bought a run-of-the-mill Rubber Stopper (available in a wide variety of sizes). Works perfectly.
 

Bob F.

Member
Joined
Oct 4, 2004
Messages
3,977
Location
London
Format
Multi Format
Ed is correct: if you have a cog lid at present, you need to buy a new lid too :sad:

Unfortunately, the pouring hole is too wide for a wine bottle cork so some hunting may be required for the economically efficient option...


Bob.
 

Nick Zentena

Member
Joined
Nov 21, 2004
Messages
4,666
Location
Italia
Format
Multi Format
Fintan do you need a lid or a red rubber cap? If all you want is the rubber cap then go to anyplace that sells winemaking supplies. They should have a rubber stopper big enough.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom