Intro to Plate Cameras

Michael W · Nov 8, 2006

I'm hoping that some kind people will give me some practical advice about getting into plate photography.
I have looked through the threads on this sub forum, but I haven't found the info I am looking for.
Basically I know almost nothing about this process & actually thought that it was no longer in use. Having found out that it is still being done it seems like an intriguing process & I would like to give it a try.

I would like to know:

What is the best camera format to buy with regards to plate availability?
I don't think I am interested in coating my own plates so i would like to buy the pre-coated ones. I gather these are no longer being produced & I will have to search for old stock perhaps from the 1980s at latest.
However, is there one particular size that is more common & easier to find than the others?

Ole · Nov 9, 2006

That all depends...

Pre-coated plates are still pruduced, by Slavich in Russia. I believe Retro Photographic still has a few packs left.

In Germany, I've found 13x18cm and 9x12cm to be relatively easy to find. From the UK I've got a few 4x5", but even there 9x12cm seems easier.

The "modern" Slavich plates are just a little bit too thick to fit in Linhof Universal film&plate holders, otherwise they could be used on any 4x5" camera. They work great in any of several hundred different models of 9x12cm plate cameras, though...

Older Kodak, Ilford, Perutz, Agfa and other plates can be used in anything. In many cases there are plate holders which fit modern camera backs - the Linhofs I mentioned above came in (at least) 6.5x9cm, 9x12cm, 4x5" and 13x18cm. There are also wooden 18x24cm plate holders with the exact same measurements as modern 8x10" film holders.

The other alternative is a "dedicated" plate camera. Which you should buy depends on where you live, how much you want to spend, and what you can find...

Michael W · Nov 9, 2006

Thanks for that.
I like the idea of a dedicated plate camera & 9 x 12 sounds like a good size.

I have an idea this size plate will also be relatively easy to process. I recall a guy in a lab showing me a small plastic tub with slots to hold the plates. It looked about as simple as processing film in a Patterson tank.

Do the plate holders for the camera work the same as sheet film holders?
i.e. can I load up several holders in a dark bag & then go out shooting?

Ole · Nov 9, 2006

I process my plates in trays, little 13x18cm (5x7") ones. It's really easy. I also have "a small plastic tub with slots to hold the plates", an old Johnson's Cut Plate and Film Daylight Processing Tank, which is just about the most useless darkroom item I have ever seen! Far more useful is a small wooden plate drying rack - you can't hang glass plates up to dry on a clothesline!

A "standard" 9x12cm camera kit consisted of a camera and three single plate holders. I have somehow managed to lay my hands on no less than six of these - three 6.5x9cm (a KaWee Patent etui, a Voigtländer VAG and a Voigtländer Bergheil) and three 9x12cm (A "Rodenstock", and two Voigtländers - a Bergheil and an Avus). The best of these are undoubtedly the Bergheils, but they tend to go for ridiculous prices.
The plate holders are thin metal things which take one single plate. There are double-side plate holders too, but they are rare (and thus expensive). The main problem is getting holders that fit the camera, there were at least six different styles from different manufacturers. Never buy a camera without three (or more) plate holders!

cblurton · Dec 6, 2006

Ole said:
Never buy a camera without three (or more) plate holders!

Hi Ole:

Terrific advice, but I've read it a bit late! I seem to have become infected with a Voigtlander collecting bug, an infection I hope is short-lived. I have a Bessa that is almost perfect that I bought for $35 Euro, a green Bergheil 6.5x9 in near mint condition I bought for 150 pounds, the Avus which I picked up for US$51 which is in excellent shape, and I just bought a Vag 9x12cm in very good condition for US$40 that is being shipped to me.

I have a home made ground glass (gg and an old film pack) and the official ground glass that came with the Avus, a Rollex Patent roll film back, and several sheet film backs (Ole, remember, you sent me 6.5x9cm sheet film holders. Thanks again for your kindness!) that can be used by both the Bergheil and Avus. I had intended to buy a Vag that was also 6.5x9 so it, too, could share the film holders, but I got the 9x12 for a good price and couldn't resist it. In retrospect, I should have! It doesn't have any type of film back.

I was planning to have all my collection be Voigtlander cameras that used either 6x9 or 6.5x9 cm film. Now I have to decide whether to resell the new Vag or get some 9x12 cm holders and use it.

Now here's my question - Are there 120 roll film holder backs that will fit my Vag? I see different types of old roll film backs on eB*y that are advertised as fitting 9x12 plate cameras and have written to the people selling them to ask if they'd fit my Vag. The sellers don't know. I don't want to buy one hoping it will fit and find out it won't. Do you have suggestions for what kinds will fit?

Thanks,

Craig

Ole · Dec 6, 2006

cblurton said:
... Now I have to decide whether to resell the new Vag or get some 9x12 cm holders and use it.

Now here's my question - Are there 120 roll film holder backs that will fit my Vag? I see different types of old roll film backs on eB*y that are advertised as fitting 9x12 plate cameras and have written to the people selling them to ask if they'd fit my Vag. The sellers don't know. ..

Yes, there are roll film backs that will fit. even some that will fit well! "RADA" is what you search for, but as you've noticed the sellers don't know what they fit. Quite often they don't even know what size camera they fit, much less what brand...

Anyway the Voigtländer cameras all used the same type of holder (in 5 different sizes, but that's relatively easy) with the most popular "Universalfalz". So the odds are on your side!

I started with 9x12cm cameras, then came across a 6.5x9 VAG. And then there was the Avus which fit so neatly inbetween, and by that time I had enough plate cameras that I could hide a little 6.5x9 Bergheil in there too. Not to mention the 6.5x9 KaWee Patent Etui - smaller than a cigarette case!

Just a stray thought: What if we swap VAGs? I could thow in a case and a few holders...

cblurton · Dec 6, 2006

Ole, I think swapping is a great idea but only if you find that the Vag I've bought is worth as much and is in at least as good a shape as your Vag. I bought it on eB*y (Item number: 270062332687) and have't seen it yet.

Here's a thought. I could contact the seller and ask him to send it directly to you (at my expense of course) if he hasn't sent it to me yet. Then, after it arrives, you can take a look and decide if you think the swap is fair. If so, you could send your Vag on to me in Hong Kong. Again, I'd be happy to pay for the postage. As I recall, I can do that using Paypal. How does this sound?

By the way, I was in Denmark all of last week doing some work at the University of Copenhagen. I looked for vintage cameras and found one shop, Photographica, that is near the shopping street in the old section of town. The store had a few interesting cameras including an unidentified brown "luxus" version of an old folder that looked like it was an Agfa. However, the prices were very high for these old cameras, just like they are in Hong Kong. In the face of competition from the Internet, I don't know how shops can stay in business.

Let me know about the swap and I'll see if I can arrange to send the camera directly to you. I will need an address and phone number if you want me to do this. Send it to me email address.

Craig

Ole · Dec 7, 2006

Craig, that's not the original lens or shutter!

The VAG would have either a Voigtar or a Skopar lens in an Embezet- or Ibsor shutter; never a Steinheil lens in a US-made shutter! (I have a 1934 price list in front of me.) Remember that Voigtländer was primarily a lens maker who also made cameras to attach their lenses to, not the other way round.

That lens might actually be better than the Voigtar - The Unofokal is four elements in four groups, and got its name because in the original design all four lenses had the same focal length (two positive, two negative).

cblurton · Dec 7, 2006

Ah, see, that's why we need knowledgeable people like you on these forums, to keep people like me out of trouble! I should have known better but didn't. I'll have the camera shipped to me, find a cut film or roll film back, and try it out and see how it works. I am also going to keep looking for a good 6.5x9 cm Vag with standard lens and shutter for my burgeoning collection!

Thanks for all of the help!

Craig

k_jupiter · Dec 14, 2006

cblurton said:
Ah, see, that's why we need knowledgeable people like you on these forums, to keep people like me out of trouble! I should have known better but didn't. I'll have the camera shipped to me, find a cut film or roll film back, and try it out and see how it works. I am also going to keep looking for a good 6.5x9 cm Vag with standard lens and shutter for my burgeoning collection!

Thanks for all of the help!

Craig

Not to confuse the issue here, just give you another option.

In the 50s and 60s, camera mags advertised slide in springbacks for 9x12 cameras that would allow you to use then standard 3.25 x 4.25 inch press film Type 5 film holders. They have built in GG too. I have 2, one for my Zeiss Tronar, one sits in it's box. 3x4 film is available again here in the states through J&C and I suspect through mail order to HK. The camera itself has a 135mm Zeiss Tessar that is quite sharp and contrasty.

Just another idear.

tim in san jose

cblurton · Dec 14, 2006

Backs for 9x12 cameras?

Hi Tim:

Thanks, I've never heard of this before. Did you get them on eB*y or someplace else? Sounds like a good solution, although I think I've managed to find 4 9x12 sheet film backs that will fit my "new" Vag from a dealer in Germany. They'll cost me 5 Euro each and shipping will be another 20-22 Euro which isn't cheap, but given that I can't find any here in Hong Kong, that may be the best solution. None-the-less, I would still like to find out more about your solution. Do you have the name of the manufacturer and a picture or two you could post?

Craig

Nate Downes · Jan 1, 2007

Hmm... this is honestly the first time anyone has mentioned the existance of 9x12cm film. I've been trying to identify the film format and holder for this oddball of a large format I have here for weeks. 4x5 is too large, 3x4 too small. The camera uses a slide-in slot rather than a spring back, which means that the holder *has* to fit. Does anyone have the measurements for the 9x12cm carrier itself so I could see if this is the right film holder for this camera?

Ole · Jan 1, 2007

As I mentioned earlier, there were at least six different styles of 9x12cm holder, and they are not interchangable. It is often easier to identify the camera and find out which type of holder would fit from that!

Nate Downes · Jan 1, 2007

It was built by Seneca after 1910 but before 1914, but other than that, there's absolutely nothing to identify the camera. No name plate, no model #, nothing.

I've been torn about just ripping the back off and building a normal 4x5 or 3.25x4.25 back for it.

vickersdc · Jan 8, 2007

Building new backs...

I've recently got hold of a Wallace Heaton 9x12 camera that uses plate holders and whilst I can cut the few millimetres off of the 9x12 sheet film to fit in these holders, I had wondered about converting the back to accept 5x4 sheet film holders instead. I believe the camera is very similar to the Voigtlander Avus - has anyone already modified one of these yet? I want to do it, but I'm also slightly reticent about doing it!

David.

Curt · Feb 14, 2007

Were plate sizes in numbers? No.2 for example or No.5?

Ole · Feb 14, 2007

No, plate sizes (at least in Europe) were not numbered.

Lenses were numbered, with a numbering system which varied from maker to maker, and also from series to series from any one maker.

It's all very confusing, but there are a few general "rules": A No.1 lens was usually intended for 9x12cm; No. 2 for 13x18, and 3 for 18x24. Unless there was a No. 2 for 10x15 - if not, there just might be a No. 1a. No. 0 was often for 6.5x9, unless that was the No.1 size. For wide angle lenses, the numbering was different and the shortest lens covering 9x12 might be a No. 00, and my No. 3 covers 24x30cm. But not necessarily...

Curt · Feb 14, 2007

Thanks Ole, that clears up what was numbered; lenses and not plates in a 1,2,3, etc. numbering system. I won't get into that feet, inch thing. I was told decades ago in elementary school that the US would be all metric before we were out of middle school. It never happened, at least in the general population, science and engineering uses it and we are cursed by having two sets of tools; SAE and Metric.

Ole · Feb 14, 2007

Curt said:
...science and engineering uses it and we are cursed by having two sets of tools; SAE and Metric.

Only two? In my job, I sometimes need to measure the same thing in meters, feet/inches and feet/(feet/100). Those one-hundredth-of-a-foot tape measures are hard to find, especially when you need one...

Intro to Plate Cameras

Michael W

Ole

Moderator

Michael W

Ole

Moderator

cblurton

Ole

Moderator

cblurton

Ole

Moderator

cblurton

k_jupiter

cblurton

Nate Downes

Ole

Moderator

Nate Downes

vickersdc

Curt

Ole

Moderator

Curt

Ole

Moderator

Intro to Plate Cameras

Moderator

Moderator

Moderator

Moderator

Moderator

Moderator

Moderator

Privacy & Transparency

Privacy & Transparency