You could try this (for 1000ml):
As said earlier, instead of adding dry phenidone powder, I use a 1% solution in glycol.
pH should be 8.20. If it's too low, add drops of a 10% NaOH solution until you hit the mark. If it's too high, add drops of acetic acid (I use cleaning vinegar, which is around 8%) until desired pH is reached.
I never mix a liter all at once but instead mix the amount I need, which is usually 150ml.
Ok, I'll try. thanks a lot
What would be the big differences with another PC developer using sodium metaborate instead of borax and sodium carbonate as in your recipe?
I don't need to have something that is mimicking xtol completely, but it would be nice to have something that can be diluted as 1+1 or 1+3 with results the same or better then D76 - and as consistent in its use....
Is that realistic?
I suppose the biggest issue with this recipe would be it doesn't keep long?