Infrared: Rollei IR 400 developed in Ars-Imago Fd

DcAnalogue

Member
Joined
Sep 25, 2014
Messages
203
Location
Rome - Italy
Format
Multi Format
Hi folks!
Just made another test shot with Rollei IR 400.
The peculiarity of this test is not in the shots itselfs but in the developer I used i.e. the Ars-Imago Fd (It's a new Italy/Swiss one).
It seems to work well, albeit I should had to develop it a little bit more....

More in my Film Blog

 

Vincent Brady

Member
Joined
Mar 4, 2008
Messages
2,079
Location
Co. Kildare
Format
35mm
They are very impressive results you have obtained,congratulations. I have just invested in a few rolls of Rollie 400 IR but your developer is not available in Ireland so I intend to use Ilford ID11 stock solution as a starting out point.
 
OP
OP

DcAnalogue

Member
Joined
Sep 25, 2014
Messages
203
Location
Rome - Italy
Format
Multi Format
They are very impressive results you have obtained,congratulations. I have just invested in a few rolls of Rollie 400 IR but your developer is not available in Ireland so I intend to use Ilford ID11 stock solution as a starting out point.

Thanks Vincent!
Anyway, if you're interested, you can order the developer (and any other film-related product...if you find your convenience) from Ars Imago International website.
 
OP
OP

DcAnalogue

Member
Joined
Sep 25, 2014
Messages
203
Location
Rome - Italy
Format
Multi Format
Some details please. The usual,what EV ect.

Hi, you can read more details in the previous posts linked in the blog's article.

Anyway, I used a chinese IR 720nm filter on a Rolleiflex 3,5F and made some bracketing adding from 6 to 9 stop respect the reading for the box speed. Generally the EV metering reading ranged from 15 to 17 EV.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…