Ilford Ortho+ and PyroCat-HD

[Eric Rose]

I want to give this a try. Hopefully I can get a realtively continous tone neg from the combo. Anyone have any asa and development recommendations??

I see on the Digital Truth site they recommend Rodinal 1:100 for 10 minutes when exposing at 40asa I believe.

I would prefer to use PyroCat-HD if anyone has any times they could share.

Thanks,

Eric

 

[Jerevan]

Not really Pyrocat HD, but I have used Rodinal 1:50, tested with 7 and 8 minutes and there was no problem to get at least a decent full-tone negative with that combo. Exposed in daylight at ISO 80. Don't know yet how it will print but it looks promising enough, to keep on working with nailing the development more accurately.

 

[Black Dog]

Ortho + is basically FP4 without red sensitisation-I've used the times for that no probs. 9 mins at 64/80 should be a good start {I used a Combi tank with 10 secs agitation every minute}.