ilford MGWT yellow stain

mitch brown · Jan 11, 2012

i did a search on this and found ref to the stain but no info as to what causes it. i have a new pack of MGWT from B&H and noticed a yellow color all along the white borders of the print. can old developer ( liquidol 1:9 )old fixer TF-4 cause this ?
what can be done to get rid of it.
thanks
mitch

Simon R Galley · Jan 12, 2012

Dear Mitch,

It can be caused by 'old' developer, far better you take it back to B&H and they will returtn it to us for checking.

Simon. ILFORD Photo / HARMAN technology Limited

Ian Grant · Jan 12, 2012

Using an alkali fixer such as TF-4 without a good acid stop bath can cause staining as some developer may still be in the emulsion.

Ian

mitch brown · Jan 12, 2012

thanks Simon and Ian
returning it is not an option as i have used a fair amount before i noticed the stain and i live in ga. i am going to start again and useing all freshly made chem and see if it still a problem in case my stop as Ian sugusted was bad.
mitch

Simon R Galley · Jan 12, 2012

Dear Mitch,

If you still have a problem let me know.

Simon ILFORD photo / HARMAN technology Limited :

mitch brown · Jan 12, 2012

thanks Simon
i will try it again tommorow and if it's still a problem after it drys i will scan it and email you the scan.
mitch

ilford MGWT yellow stain

mitch brown

Simon R Galley

Ian Grant

mitch brown

Simon R Galley

mitch brown

Privacy & Transparency

Privacy & Transparency