ILFORD ID-62

[Tom Hoskinson]

Tom Hoskinson submitted a new resource:

(there was a url link here which no longer exists) - ILFORD ID-62

Ilford ID-62

A PQ developer for Films and Plates.
Stock Solution
Warm water (125° F or 52 °C) -----------750.0 ml
Sodium Sulphite, anhyd -------------------50.00 gm
Sodium Carbonate, anhyd -----------------60.00 gm
Hydroquinone------------------------------- 12.00 gm
Phenidone ------------------------------------0.50 gm
Potassium Bromide------------------------- 2.0 gm
Benzotriazole---------------------------------0.2 gm
Water to make 1 litre

For Film and Plate use mix 1 part...

(there was a url link here which no longer exists)

 

[Sean]

Comments from previous article system:

By Tom Hoskinson - 04:35 PM, 06-06-2006 Edit Rating: None
Also see: Ilford ID-78
(there was a url link here which no longer exists)

Ilford Universal Concentrated Liquid Developer (there was a url link here which no longer exists)
By Gerald Koch - 09:32 PM, 06-06-2006 Edit Rating: None
ID-62 is a Phenidone version of ID-20. Ilford markets a developer very similar to ID-62 as Bromophen. The main difference being the addition of a calcium sequestering agent. Since ID-20 uses Metol rather than Phenidone it would produce warmer tones than ID-62.
By Tom Hoskinson - 10:55 PM, 06-06-2006 Edit Rating: None
The Compact Photo-Lab Index states for ID-20:

"With Bromide paper, this developer gives good neutral blacks."

See: (there was a url link here which no longer exists)

I would expect that ID-20 would produce somewhat warmer results if it were further diluted and the amount of Potassium Bromide was increased.

 

[Ian Grant]

ID-62 and ID-78 are slight variants of the original formula - ID-20

ID-62 is the Phenidone variant but due to the addition of Benzotriazole gives cold tones on warm tone papers. It is both a print & general purpose negative developer.

ID-78 again uses Phenidone which produces slightly finer grain compared to Metol and hence warmer tones, but instead of using Benzatriazole the bromide level is increased instead. It was \designed to be a Warm Tone developer.

ID-20 gives Neutral tone, ID-62 cold tones and ID-78 warm tones - using warm tone papers.

Ian