Ilford film developers.....

CMoore

Subscriber
Joined
Aug 23, 2015
Messages
6,220
Location
USA CA
Format
35mm
The Ilford site was "Temporarily Unavailable".
Not sure it would have done me much good with my question though.

Ilfotec HC Vs Ilfosol-3
I am just curious, i have no complaints about HC and no desire to change. But from what i had time to read, before the site went off..... they are both called Fine Grain Developers and both develop a lot of types of film.
I assume there must be SOME difference between the two.
What would a photographer do "better" with one of these over the other.?
Thank You
 

Harman Tech Service

Partner
Partner
Joined
Sep 14, 2015
Messages
98
Format
Multi Format
Ilfosol 3 will definitely give you finer grain than Ilfotec HC (especially if you use 1+9). However, HC is more economical and is also better for push processing.
As usual, it depends on what you want...

Regards,
David
 
OP
OP

CMoore

Subscriber
Joined
Aug 23, 2015
Messages
6,220
Location
USA CA
Format
35mm
Per Usual... thanks for the info.
98% of my shooting is 35mm HP5 or FP4 at box ASA
 

foc

Subscriber
Joined
Jun 30, 2010
Messages
2,513
Location
Sligo, Ireland
Format
35mm
I have used Ilfosol 3 for years and find it a very good all round developer.
I am very happy with it.
 

foc

Subscriber
Joined
Jun 30, 2010
Messages
2,513
Location
Sligo, Ireland
Format
35mm
Tom Kershaw said:
How do you find it with 400 speed films? I've been using Ultrafin for slow and medium (100 ISO) films recently with good results.
Click to expand...

Hi Tom, I have developed up to 3200ASA with Ilfosol 3 and the results were as expected.
I have heard some say it is grainy with 400 speed and more but to my eye it was what I expected from that speed. I have processed films colour and B&W commercially for the last 40 years and any developer I have used was good. I must admit I did have a soft spot for Champion Promicrol but then that's just personal.
The only reason I changed from ID11 to Ilfosol 3 was mixing 5lt of power became a bit of a chore whereas I can decant 1L of Ilfosol 3 into six 500 ml glass bottles in a minute or two, and less cleaning up after.
Try it and see for your self.
 

NB23

Member
Joined
Jul 26, 2009
Messages
4,307
Format
35mm
Not sure about ilfosol-3 giving finer grain. If anything, ilfosol-3 will give extremely high acutance. Sharp grain.

I love both, but I tend to use ilfosol-3 with tmax100 in order to add some grit and to kill the general digital look to it.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…