I bought a Adox Golf 63...

[marciofs]

...for €20 IN A Flea Market.

I have cleaned it and it seems to work fine. I will take pictures of test tomorrow.

I was reading about this camera and here some feature:

Adoxar 1:6,3 / 75mm lens
Vario shutter 1/25-1/200
Producedi during 1952-1958

 

[marciofs]

Looking at the test I made it seems the camera fole may have some light leek.

Any suggestion on how to fix it on my own?

I try to find a place where they could fix it but I was informed that I probably won't find any shot to fiz it in town.

 

[MattKrull]

The shutter is in the lens, so it's easy to find the light leak. Open the back, go into a dark room, shine a flashlight round the outside of the bellows look inside the back for any pin-holes the light is getting through. Also, check the edges of the film back door to see if the light trap (folder that old, probably felt strips or just a light tight indent - but could be decayed foam, I'm not familiar with the golf 63) is making a good seal. As a cheap quick fix, you can put black electrical tape over any pin holes in the bellow. It isn't a permanent fix, but using the camera like that for a few rolls will probably tell you if spending the money to send the camera away for a CLA / bellows replacement is worth it to you.

 

[MattKrull]

Video on how to replace the bellows yourself

 

[marciofs]

Video on how to replace the bellows yourself

Thanks a lot...
I will search for bellows to replace maine.