How to clean out hardened grease from focus track?

The Bee keeper

A
The Bee keeper

  • 1
  • 3
  • 72
120 Phoenix Red?

A
120 Phoenix Red?

  • 6
  • 3
  • 90
Chloe

A
Chloe

  • 1
  • 3
  • 84
Fence line

A
Fence line

  • 10
  • 3
  • 133
Kenosha, Wisconsin Trolley

A
Kenosha, Wisconsin Trolley

  • 1
  • 0
  • 106

Forum statistics

Threads
198,156
Messages
2,770,456
Members
99,567
Latest member
BlueLizard06
Recent bookmarks
0

BradS

Member
Joined
Sep 28, 2004
Messages
8,117
Location
Soulsbyville, California
Format
35mm
I have a very nice older wooden 4x5 field camera. The focus rack and pinion assembly appears to be in need of some routine maintenance. I think it just needs to have the old, dried up hardened grease/lube removed and maybe, some new lube.

I'd like to clean out the old grease without damaging the wood finish...any suggestions?
 
Joined
Dec 10, 2009
Messages
6,297
Format
Multi Format
Is there a way to remove the hardware?
 

bdial

Subscriber
Joined
Jan 2, 2005
Messages
7,450
Location
North East U.S.
Format
Multi Format
I would get as much off as you can mechanically with toothpicks or similar wood or plastic probes, then follow up with a cloth or perhaps Q-Tips or more toothpicks sparingly moistened with a solvent like paint thinner.
If the finish is lacquer or shellac a petroleum a solvent like the thinner shouldn't damage it, OTH alcohol will attack shellac, and lacquer thinner will soften lacquer.
Though with either, just letting the solvent evaporate should get the finish back to where it was, assuming nothing like finger prints,dust or water (rubbing alcohol) gets in it during the process.
 

fotch

Member
Joined
Mar 16, 2005
Messages
4,774
Location
SE WI- USA
Format
Multi Format
Probaly a dumb question however, let me ask, can you take it apart so you only have metal parts to clean?
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,267
Location
Southern California
Format
Multi Format
I would get as much off as you can mechanically with toothpicks or similar wood or plastic probes, then follow up with a cloth or perhaps Q-Tips or more toothpicks sparingly moistened with a solvent like paint thinner.
If the finish is lacquer or shellac a petroleum a solvent like the thinner shouldn't damage it, OTH alcohol will attack shellac, and lacquer thinner will soften lacquer.
Though with either, just letting the solvent evaporate should get the finish back to where it was, assuming nothing like finger prints,dust or water (rubbing alcohol) gets in it during the process.

For get disassembling, that can get you in deep $#!+. Do what he said.
 

Prarry

Member
Joined
Jul 22, 2005
Messages
31
Location
Bedfordshire
Format
35mm
White spirit (UK) or mineral spirits (US) is relatively mild, it will not affect many wood finishes once these are fully dried. It will soften the waxy residue left when the lighter oils evaporate off from grease.
 

mgb74

Subscriber
Joined
Jan 24, 2005
Messages
4,771
Location
MN and MA US
Format
Multi Format
I would be tempted to start with a somewhat mild water based degreaser.
 
OP
OP
BradS

BradS

Member
Joined
Sep 28, 2004
Messages
8,117
Location
Soulsbyville, California
Format
35mm
geez...tooth picks and mineral spirits... thanks guys. I don't know what's going on with my memory...I've done this before on several previous cameras. I guess my brain was switched off this morning or something! Anyway, I've cleaned out the tracks and the focus movement is so much smoother and easier now. There was...I think a thin layer of wax build up.

All good to go now...and such a sweet camera!

Thanks ! :smile:
 
OP
OP
BradS

BradS

Member
Joined
Sep 28, 2004
Messages
8,117
Location
Soulsbyville, California
Format
35mm
This is the result of toothpick alone
20130113_132251.jpg
 
Joined
Dec 10, 2009
Messages
6,297
Format
Multi Format
I see screws in the shot. Possibly remove the the track and soak it in some mineral spirits? Keep in mind that you'll have to get the front and rear standards off first.
 

E. von Hoegh

Member
Joined
Sep 14, 2011
Messages
6,197
Location
Adirondacks
Format
Multi Format
I see screws in the shot. Possibly remove the the track and soak it in some mineral spirits? Keep in mind that you'll have to get the front and rear standards off first.

Yes, if the track is easy to remove, go at it with a toothbrush and mineral spirits. Clean the pinions the same way if possible. Try one of the dry bicycle chain lubes, they attract far less crud.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom