How good are Chinese Seagull TLR's?

chip j · Mar 26, 2015

I'd like to know how sharp the optic is and the camera's reliability, Anyone?

heespharm · Mar 26, 2015

The glass is sharp enough but it failed with a couple months of owning one... Won't wind or fire now

Sent from my iPhone using Tapatalk

Colin Corneau · Mar 26, 2015

I have an older one, all Chinese characters and metal construction. Shot a roll with it and had a scratch running down the length of the film - that's not necessarily a camera flaw, just a one-off. My main issue was the shutter speeds 1/30th and below were out.
Not really sure of the optics - they seemed OK but I doubt they'll get mistaken for a Rollei any time...maybe like an older Tashica, I guess?
A fun camera to try out.

summicron1 · Mar 27, 2015

ya get what you pay for.

chriscrawfordphoto · Mar 27, 2015

Bought one new about 15 years ago. It was the top of the line model with the wind crank. The lens was VERY sharp. Unfortunately, the shutter release broke after 6 rolls of film and the cost of repair was more than I paid for it new. I would not buy one again.

piu58 · Mar 27, 2015

> Bought one new about 15 years ago. It was the top of the line model with the wind crank. The lens was VERY sharp. Unfortunately, the shutter release broke after 6 rolls of film and the cost of repair was more than I paid for it new. I would not buy one again.

I had a similar experience. Go for a Rolleicord.

Richard S. (rich815) · Mar 27, 2015

I lived in China for a few years back in the late 90's. I've tried a few. Older and newer. Will never buy another. One the shutter blew open and pieces flew across the room. Another the gearing froze up. They are garbage. Buy a good used Rolleicord.

Roger Cole · Mar 27, 2015

Or a Yashicamat.

Claudia Moroni · Mar 27, 2015

I own a Seagull 4-a and I travelled with it all around the Balkans.

The lens is ok and I never had a problem with the camera (except some troubles focusing, but I have that with most cameras) , unfortunately I seem to be the only one.

gone · Mar 27, 2015

I have no experience w/ the TLRs, but once owned one of the Seagull folders. Like everyone says, it had a great lens, and the folders have an ingenious film mask for 6x6 and 6x4.5, but the build quality was truly crap. I sold it after one roll, and the new buyer wasn't pleased w/ it either.

If you want cheap and good image quality, my recommendation would be for an old Argoflex E model TLR that shoots 620 and 120 film. Their shutters go up to 1/200, and the 3 element lens takes wonderful photos. Mine cost $20 on Etsy a year or two ago, and after I cleaned off the shutter blades to get the speeds up it has been a fine little camera. They're also small and light (Bakelite bodies). The Ricohflex TLRs are OK too, but most models have shutters that only run to 1/100, and they are heavy for their somewhat small size. Or, spend about $50 to $80 for an older Rolleicord and you step up quite a bit in terms of build quality. The Triotar is one of the truly great TLR lenses for portraits.

Here's a few from my Argoflex, using the appropriately cheap Chinese Shanghai GP3 film. I'm not at all happy w/ this particular developer, and the lighting was awful for the portrait (nearly all the light was coming from the window in the back), but the developer may work better when I get the hang of it. First two are in Freestyle Legacy L110, the last two in Rodinal at 1:25.

baachitraka · Mar 27, 2015

I will also recommend a Rolleicord...

Meyer Trioplan · Mar 27, 2015

I've got an early 1990's Seagull 4A-103 TLR that I bought new from Porters. I actually really like it, as it gives a really nice effect to out of focus areas, and I find the little levers easier to read than the windowed dials on my Yashica (though it leaves the gears more prone to gunk) . I also find focusing it to be easier than my Yashica 12. I wouldn't hesitate to pull the trigger on one for under $50 if it is working, but I'm not sure I'd trust an as-is one from the "bay."

GarageBoy · Mar 27, 2015

Who WILL CLA these things?

Alex Muir · Mar 27, 2015

I had two. The first one had the lens panel way out of alignment, so I got my money back. The second one was quite recent, and worked ok. I sold it quite quickly because I didn't like the viewing arrangement. It didn't have a fresnel screen, and it was difficult in any light conditions to see what was in frame. I can't recall the model number, but it was not the top of the range. I also had a Lubitel 166 which is poor quality plastic, but is cheap and gave me better pictures than the Seagull.
Alex.

removedacct1 · Mar 27, 2015

Roger Cole said:
Or a Yashicamat.

Or an Autocord...

Richard S. (rich815) · Mar 27, 2015

Hey, when they work they're fine. The lenses are great. But I wouldn't pay $20 for one (as I did for two others) because they go on you within a year or two or sooner. Get something with decent build quality so you have a reliable camera.

Jim Jones · Mar 27, 2015

I bought one of the first Seagull TLRs to arrive in Kansas City in the 1970s. It seemed to function when new. A few years later, before ever being loaded with film, the shutter quit.

R.Gould · Mar 27, 2015

I've had a couple of them, both the top of the range modes, great lenses, very sharp, but the build quality of the cameras I rate as just above junk status, when they do work they are fine, trouble is you could not depend upon them working, so you always need to take a back up when out as they always went wrong, you would be far better off getting a Rolleicord or even better you can find Rolleiflex Automats in good working condition but perhaps not cosmitically great, for not that much, I got an automat 4 working perfectly for just £75 (GBP) and they are great workhorses and will outlast any seagull
\richard

benjiboy · Mar 27, 2015

Wrong question, it should be "how bad are Chinese Seagull TLR's"

Alan Johnson · Mar 27, 2015

The 4A-103 ,-105 and -107 have a 3 element lens, the -109 has a 4 element lens. My 4A-103 has a split image screen, crank wind and flash sync. The good spec is tempting if you know a good repair guy as I do, he says they are not difficult to repair.
Generally I shoot landscapes at f11 or f16 where the 3 element lens is satisfactory or good. Here's a 4A-103 video:
http://player.mashpedia.com/player.php?q=8v1ESCv25ws
The 4B is a basic version with red window film counter and knob wind.
I believe they still sell refurbished ones at the Shanghai Camera Museum,(almost) still in production.

DREW WILEY · Mar 27, 2015

Aren't these the kinds of plastic things you used to get for free inside Cracker Jacks boxes?

cliveh · Mar 27, 2015

It's made in China, I rest my case.

Richard S. (rich815) · Mar 27, 2015

cliveh said:
It's made in China, I rest my case.

I see where you're coming from on that. However there was a time when people said the same thing about things made in Taiwan, and before that Japan. A lot more QC these days on many Chinese-made products, and better all the time. That said not with these cameras though...

Roger Cole · Mar 27, 2015

cliveh said:
It's made in China, I rest my case.

Some very good stuff is now made in China - also plenty of junk, and plenty of "well it really is good enough for this purpose" stuff.

I know people who have worked closely with Chinese manufacturing and the Chinese are definitely capable of producing quite good stuff.

Check most any consumer electronics these days and just try to buy something that is NOT made in China. Even the Japanese brands generally are. Occasionally you can find something made in Malaysia or South Korea but Chinese stuff predominates (and is generally fine if QC is overseen by a Japanese or South Korean company that commissioned it.)

Scott Gibson · Mar 28, 2015

I was recently given an older Seagull TLR from a relative who lives in China. I have not had a chance to shoot with it yet, but I believe it is a 4B-1, with the manual red window film advance and a mask for 6x4.5. It has a metal body and is very heavy. To me, it seems like a quite robust and solidly constructed camera, although pretty much everything I've read about Seagulls would seem to indicate the opposite! I wonder if the reliability issues are limited to the newer models being sold today? Or maybe this one will fall apart once I actually attempt to use it

How good are Chinese Seagull TLR's?

chip j

heespharm

Colin Corneau

summicron1

chriscrawfordphoto

piu58

Richard S. (rich815)

Roger Cole

Claudia Moroni

Attachments

gone

baachitraka

Meyer Trioplan

Attachments

GarageBoy

Alex Muir

removedacct1

Richard S. (rich815)

Jim Jones

R.Gould

benjiboy

Alan Johnson

DREW WILEY

cliveh

Richard S. (rich815)

Roger Cole

Scott Gibson

How good are Chinese Seagull TLR's?

Attachments

Attachments

Privacy & Transparency

Privacy & Transparency