Help finding aperture blade parts for Compur Rapid on Zeiss Ikoflex IIa

[Uppi]

I am searching for replacement aperture blades for the Compur Rapid shutter on Zeiss Ikoflex IIa (Early version). The lens is a Tessar 75mm f/3.5. It has 10 aperture blades and 5 shutter blades.
The maximum diameter according to the part that holds the aperture blades is about 17.9 mm. The radial width of the blade is about 4.7mm. The blade has 2 holes, each located on opposite sides.
Does anyone know which cameras share the same aperture blade part, or someone who might have a spare part in their inventory?

 

[Dan Daniel]

photos? Include a scale.

Also, https://www.flutotscamerarepair.com/

 

[Ian Grant]

It should be standard Compur Rapid #00 shutter & aperture blades.

Ian

 

[Uppi]

Thank you for the responses! I’ve attached photos of the aperture blade and the ring that holds the blades.

 

[Mamiya_Repair]

If you PM me I can help as I have all Compur parts, new, including the aperture blades.

 

[Uppi]

If you PM me I can help as I have all Compur parts, new, including the aperture blades.

Thank you for the help! Unfortunately, I need to make 18 more posts before I can PM you. If it is not a problem, I will re-message you once I complete the requirement. Thank you for your patience!

 

[MattKing]

@Mamiya_Repair can initiate the PM, after which you can participate in the Conversation.

 

[Uppi]

Thank you @Mamiya_Repair for the aperture blade! I just picked it up from the mailbox this morning. I am excited to get the camera working. Many thanks to everyone here for helping me.