Help finding aperture blade parts for Compur Rapid on Zeiss Ikoflex IIa

Uppi

Member
Joined
Feb 19, 2022
Messages
6
Location
North America
Format
Multi Format
I am searching for replacement aperture blades for the Compur Rapid shutter on Zeiss Ikoflex IIa (Early version). The lens is a Tessar 75mm f/3.5. It has 10 aperture blades and 5 shutter blades.
The maximum diameter according to the part that holds the aperture blades is about 17.9 mm. The radial width of the blade is about 4.7mm. The blade has 2 holes, each located on opposite sides.
Does anyone know which cameras share the same aperture blade part, or someone who might have a spare part in their inventory?
 
OP
OP

Uppi

Member
Joined
Feb 19, 2022
Messages
6
Location
North America
Format
Multi Format
Thank you for the responses! I’ve attached photos of the aperture blade and the ring that holds the blades.
 
OP
OP

Uppi

Member
Joined
Feb 19, 2022
Messages
6
Location
North America
Format
Multi Format
If you PM me I can help as I have all Compur parts, new, including the aperture blades.

Thank you for the help! Unfortunately, I need to make 18 more posts before I can PM you. If it is not a problem, I will re-message you once I complete the requirement. Thank you for your patience!
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
52,983
Location
Delta, BC Canada
Format
Medium Format
@Mamiya_Repair can initiate the PM, after which you can participate in the Conversation.
 
OP
OP

Uppi

Member
Joined
Feb 19, 2022
Messages
6
Location
North America
Format
Multi Format
Thank you @Mamiya_Repair for the aperture blade! I just picked it up from the mailbox this morning. I am excited to get the camera working. Many thanks to everyone here for helping me.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…