I don't know if Kindermann is still doing camera CLA's and repairs but if they are DON'T send anything to them. I sent them a Leica M5 for a CLA and they butchered it. Scratched the top plate, the rangefinder was out of alignment and the work they were suppose to do so I could use regular batteries was botched. I called to complain and all they had to say was they hated working on M5's. I finally got a refund out of them after a lawyers letter.
Shame - Joe was a skilled tech that I used many times.
I haven't heard of any others in the area unfortunately and need a 500 EL/M CLA'd
Does anyone know of others within Canada -- or even in the US aside from that one Oddess guy?
Reopening this query, since I have a 500C which won't wind. The lens is off, the mirror and shutter are up, turning the shutter cocking screw doesn't work - it won't turn enough.
Anyone who can repair a lens should be able to repair an enlarger lens, which is much simpler than almost any other lens. Well, depending on what's wrong with it.
Anyone who can repair a lens should be able to repair an enlarger lens, which is much simpler than almost any other lens. Well, depending on what's wrong with it.
@Carnie Bob -- I know @Light Capture can fix Hasselblad lenses. There are undoubtedly numerous places within Toronto that can either fix your lens or know someone who can fix it. There's this place (Mississauga), which might fix it. Other than balsam separation or scratches or coating loss, any problems an enlarging lens would have should be able to be fixed by anyone halfway competent. It's just a barrel lens with an aperture.