I have a 52051 meter prism that is very responsive, but the needle will stick at a certain point.... If I tap the prism lightly it will move like its gummed up..... Anyone have this problem? Easy Fix?
Hasselblad Meter Prism Issue
-
A
- Thread starter klop
- Start date
Recent Classifieds
-
Sold For Sale: 10 rolls of 120 film *SOLD*
- Started by Brad Bireley
-
Free Free; Bright Lab Jr. Safelight for Shpg Cost
- Started by waynecrider
-
Free Free; AV / Photo Lamp For Shipping Cost
- Started by waynecrider
-
For Sale Yashica Lynx 14 and Lynx 14e.
- Started by Chan Tran
-
For Sale 4x5 film holders
- Started by Early Riser
Forum statistics
Could be several things(doh!)
A bit of dirt in the coil or pivot, a bit of stuff/fuzz that would hang the needle up.
When you say the needle will move like it's gummed up, do you mean It's slow to respond?
If that's the case, because the needle's mounted in bearings like a fine watch
there's a possibility of dirt on or near the pivot. None are insurmountable but
they need a delicate touch.
A bit of dirt in the coil or pivot, a bit of stuff/fuzz that would hang the needle up.
When you say the needle will move like it's gummed up, do you mean It's slow to respond?
If that's the case, because the needle's mounted in bearings like a fine watch
there's a possibility of dirt on or near the pivot. None are insurmountable but
they need a delicate touch.
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |