Hasselblad A12 Back Question

mfratt · Oct 22, 2012

So I just got my first Hassie (OMG YAY)! It came with two backs. One seems to be fine, the other look okay, except that when winding it, it will not stop at the first frame. It "clicks" into 1 and the white dot appears, but it will not stop. The body's advance/cocking lever seems to take care of it from there.

Anyway, wondering if anyone knows whether this is a relatively easy fix or not.

Alan W · Oct 23, 2012

What you're describing sounds normal.It's the camera's advance knob/lever that advances the film in the back after you've manually advanced it to "1".

Nick Merritt · Oct 23, 2012

No, there's a problem with it; it should stop automatically when frame 1 is reached. Here's the manual: http://www.cameramanuals.org/hasselblad/hasselblad_a12_a24.pdf

John Koehrer · Oct 23, 2012

Depends on whether it'a a 12 or A12.
The A series will stop automatically, the 12 won't.

mfratt · Oct 23, 2012

John Koehrer said:
Depends on whether it'a a 12 or A12.
The A series will stop automatically, the 12 won't.

How do I tell which it is? My working back (which stops) is labeled 12 not A12.

Alan W · Oct 23, 2012

What does the winding crank on the back look like?If it can't be folded away it's an old one and the numbers will keep coming as long as you wind-these also have the number on the paper backing visible through the hatch on the back.

mfratt · Oct 23, 2012

Alan W said:
What does the winding crank on the back look like?If it can't be folded away it's an old one and the numbers will keep coming as long as you wind-these also have the number on the paper backing visible through the hatch on the back.

Its definitely a later back then, it has the normal folding crank lever.

I ran a roll through it today, seemed to work fine but we will see how the slides look...

Hasselblad A12 Back Question

mfratt

Alan W

Nick Merritt

John Koehrer

mfratt

Alan W

mfratt

Privacy & Transparency

Privacy & Transparency