If you are interested in individual components, please message me. Accept for offers. Asking for $2900 with insured shipping. However, payment is via Zelle or Paypal F&F only. Local meet up is preferred. Video or Zoom call is encouraged if you are not local in Atlanta.
If buy individually:
Camera Body+WLF: SOLD
A12: SOLD
PM5: SOLD
Digital Back: $950.
For sale is a very nice condition 501CM produced in the year 2000. The kit contains almost everything you need to start digital and analog shooting except for a lens, so you have your own option to choose a lens to start with.
PM for more pictures.
The digital back is a rare Hasselblad Ixpress V 16M CCD back in mint condition with extremely low actuation. Only 1100, the lowest I have ever seen, the total power on time is just about 1 day 10 hours. Making the CCD sensor in practically "new" condition. This digital back is essentially Imacon 96c, but a special V edition, relatively rare. However, this digital back has an exchangeable adapter that can make it attach to various cameras like Mamiya or so. Those adapters are easily available, except for the Hasselblad adapter with this digital back. I believe those Hasselblad adapters are usually around $500 each. The Image Bank's hard drive has been replaced with a new one. I can also help swap in an SSD with a larger capacity if you are interested. I personally like the Imacon design. The separated storage and sensor design make the camera lighter and easier to handle. (The storage unit has a belt clip) The CCD is actively cooked so it has lower noise under long exposure than phase one P backs.
(The digital part will have: IXpress V96C back with sensor cover, Imagebank, 1m & 10m tethering cable, Flash Sync Cable, 1 NP-F330 Battery, Battery charger, Firewire Cable, and Firewire PCI card for PC, You will need to download the Flexcolor software from the Hasselblad website)
The split image focusing screen is bright and benefits accurate focusing by a significant amount.
The two film backs are the latest version with minimum use. The light trap was recently replaced, and I was using it during my Yellowstone trip last month. Everything works great.
The PM5 has a -1D diopter on it. Not an issue. I don't wear glasses and it works just fine for me.
All caps are included, for the PM5, and the body.
The strap is a bit used, I was using it with my fully loaded 503Cxi, extremely heavy so the leather suffered a bit, but the metal lug is in good shape. In the worst case, you can harvest those metal lugs and use your own strap.
I also have additional filmbacks for sale for additional, they are a bit more beaten from my daily use but functionally no issue. I also have extra light meters. A Minolta VF and a sekonic 358. I will give you a discounted price if you decide to buy this kit all.
Below are the equipment pictures. Note: Lens and tripod are not included. If you need more pictures or sample images, please let me know.
If buy individually:
Camera Body+WLF: SOLD
A12: SOLD
PM5: SOLD
Digital Back: $950.
For sale is a very nice condition 501CM produced in the year 2000. The kit contains almost everything you need to start digital and analog shooting except for a lens, so you have your own option to choose a lens to start with.
PM for more pictures.
The digital back is a rare Hasselblad Ixpress V 16M CCD back in mint condition with extremely low actuation. Only 1100, the lowest I have ever seen, the total power on time is just about 1 day 10 hours. Making the CCD sensor in practically "new" condition. This digital back is essentially Imacon 96c, but a special V edition, relatively rare. However, this digital back has an exchangeable adapter that can make it attach to various cameras like Mamiya or so. Those adapters are easily available, except for the Hasselblad adapter with this digital back. I believe those Hasselblad adapters are usually around $500 each. The Image Bank's hard drive has been replaced with a new one. I can also help swap in an SSD with a larger capacity if you are interested. I personally like the Imacon design. The separated storage and sensor design make the camera lighter and easier to handle. (The storage unit has a belt clip) The CCD is actively cooked so it has lower noise under long exposure than phase one P backs.
(The digital part will have: IXpress V96C back with sensor cover, Imagebank, 1m & 10m tethering cable, Flash Sync Cable, 1 NP-F330 Battery, Battery charger, Firewire Cable, and Firewire PCI card for PC, You will need to download the Flexcolor software from the Hasselblad website)
The split image focusing screen is bright and benefits accurate focusing by a significant amount.
The two film backs are the latest version with minimum use. The light trap was recently replaced, and I was using it during my Yellowstone trip last month. Everything works great.
The PM5 has a -1D diopter on it. Not an issue. I don't wear glasses and it works just fine for me.
All caps are included, for the PM5, and the body.
The strap is a bit used, I was using it with my fully loaded 503Cxi, extremely heavy so the leather suffered a bit, but the metal lug is in good shape. In the worst case, you can harvest those metal lugs and use your own strap.
I also have additional filmbacks for sale for additional, they are a bit more beaten from my daily use but functionally no issue. I also have extra light meters. A Minolta VF and a sekonic 358. I will give you a discounted price if you decide to buy this kit all.
Below are the equipment pictures. Note: Lens and tripod are not included. If you need more pictures or sample images, please let me know.
Last edited:
