Thank you Q.G., the camera did have the shutter reset. Very easy to bracket shots. I should have gotten the F winder much sooner.
yes, it's confusing, what is going on is the shutter is synced to the back, so when 12/24 is hit it locks out, stopping the winder (as if the manual crank was on), BUT, you Must use the small winder on the magasine to roll up the backing paper to keep the film safe; one important tip, the winder winds just like the eld models, so BEFORE starting a multi-exposure, you MUST take it off, so you can access & use the button to de-clutch the winding drive for independent shutter cocking {same on the 2000 for re-setting the shutter from the "retracted" safe position}- engage multi, re-cock, add winder and go. a Bonus tip here, some 2000 models have a slider beside the mag lock on the body, setting this 'retract', or NOT mode, if using winder, have the retract set to "off" to save flailing about, esp. if you need to move fast.