Want to Buy Haas Intellifaucet D250 Wanted

Matthew Cherry · Jul 31, 2013

Hello All!

I'm about to build my new darkroom sink and I'm trying to source a Haas Intellifaucet at a reasonable price. If you have one you're selling, please let me know.

Thank you!

nsurit · Jul 31, 2013

I think I found mine on eBay a number of years ago. Save the search and it will show up. I sent it back to Haas for an overhaul (probably not needed) and they charged what I considered a very reasonable price. You are going to love it.

J Drew · Jul 31, 2013

Have U tried eBay?
I saw a Haas on eBay w/in the last 3 weeks.
I don't know if it was a "D250". I'm pretty sure it was an "Intellifaucet"
I think it was in a SS sheetmetal case. I know it didn't have bit's & pieces hanging out.
Jay Drew
jdrew001@gmail.com

jon koss · Aug 1, 2013

I looked on the 'Bay for a brief eternity and never saw one at a price/condition/return policy point that made sense. I finally did the right thing and bought one new from the factory. Best darkroom decision ever. There is no way to overestimate the value of the time saved in the darkroom. Many folks will spend the value of an Intellifaucet on lattes in a year without blinking. Nobody would think you were crazy if you spent $4000 on a motor for a bass boat so you should not feel funny about dropping $1200 on a darkroom tool that will last as long as you live. If you do not have the cash, this type of item is a good choice for a credit card expenditure because it is a long term durable item and you will not be suffering any temptation to buy a second one anytime soon!

Just two cents from the voice of experience.

Jon

Ken Nadvornick · Aug 1, 2013

jon koss said:
I finally did the right thing and bought one new from the factory. Best darkroom decision ever. There is no way to overestimate the value of the time saved in the darkroom. Many folks will spend the value of an Intellifaucet on lattes in a year without blinking.

Yes, yes, a thousand times yes.

I stretched and bought a new K250 ten years ago. Absolutely, positively the best darkroom expenditure I ever made. There is nothing like pressing a button... and instantly getting perfect temperature water. Every time. Over and over. For the rest of your natural life.

Mine is so precise that I when using water jackets I routinely adjust by 1/10ths of degrees to account for heat gained or lost to the environment from SS holding tanks. There is no slop. There is no error. Perfect every time.

The only caveat might be to verify in advance how many weeks each year you can count on a sub-68F ambient cold water supply for mixing. Or whatever temperature you use. This will tell you how many weeks of use you can expect annually. Fortunately for me in the Pacific Northwest, my ambient cold water is under 68F year round. But YMMV...

Ken

nsurit · Aug 1, 2013

Ken Nadvornick said:
Yes, yes, a thousand times yes.

I stretched and bought a new K250 ten years ago. Absolutely, positively the best darkroom expenditure I ever made. There is nothing like pressing a button... and instantly getting perfect temperature water. Every time. Over and over. For the rest of your natural life.

Mine is so precise that I when using water jackets I routinely adjust by 1/10ths of degrees to account for heat gained or lost to the environment from SS holding tanks. There is no slop. There is no error. Perfect every time.

The only caveat might be to verify in advance how many weeks each year you can count on a sub-68F ambient cold water supply for mixing. Or whatever temperature you use. This will tell you how many weeks of use you can expect annually. Fortunately for me in the Pacific Northwest, my ambient cold water is under 68F year round. But YMMV...

Ken

Or if you live in the Southwest where the water temp is seldom that low, you can buy a chiller. My water comes from above ground tanks and much ofthe year it is pretty warm.

Matthew Cherry · Aug 1, 2013

Sounds great guys, thanks.

I do have a chiller that I'm plumbing into my jobo for film development in the warm months. I plan on testing it for B&W development, first to make sure I like it. If not, I'll plumb the chiller into the sink.

I have come across a nearly new Delta (CPM, Inc.) Model 25 water panel for $60.... Kind of hard to pass a deal like that up, so I may go that route for now, unless you guys can convince me that to do so would be a waste.

CatLABS · Aug 1, 2013

jon koss said:
I looked on the 'Bay for a brief eternity and never saw one at a price/condition/return policy point that made sense.Jon

Ebay has the best return policy in the world regardless of what any seller might claim or write in his item description - if you dont like it - send it back, your refund is always guaranteed by Ebay, regardless of what a seller might say or claim.... There is not an easier way to return things in the world .

greybeard · Aug 1, 2013

Matthew,

One thing that you may not know (and that I found out the hard way) is that the thermostatic servo valves (CPM and their ilk) require a substantial minimum flow to work properly. This flow may be much larger than you want or need. There is (or was) a factory mod kit that supposedly reduced the minimum flow to something like 2.5 GPM from the usual 5 (or something like that) which is still a lot of water. Also, every one that I have ever used took forever to stabilize, particularly at low flow.

I look forward to eventually having a chiller to bring the 71 F well water down below 68 so I, too, can use an Intellifaucet

jon koss · Aug 3, 2013

CatLABS said:
Ebay has the best return policy in the world regardless of what any seller might claim or write in his item description - if you dont like it - send it back, your refund is always guaranteed by Ebay, regardless of what a seller might say or claim.... There is not an easier way to return things in the world .

The official eBay guidance follows. It is not quite as Shangri-La.

Do I have to accept returns?
No, but you do have to specify a return policy. You may specify that you do not accept returns by setting your policy to No returns accepted. If you accept returns, youre required to accept returns for any reason, including when buyers change their minds.

We encourage you to accept returns to attract more buyers and increase the likelihood of selling your items. All sellers should familiarize themselves with the terms of the eBay Buyer Protection Policy, which offers buyers certain protections if an item is not as described or not received.

CatLABS · Aug 3, 2013

jon koss said:
All sellers should familiarize themselves with the terms of the eBay Buyer Protection Policy, which offers buyers certain protections if an item is not as described or not received.
[/B]

SNAD (significantly not as described) actually means you can always return an item, regardless of the sellers policy, because not accurately describing the item, or if it was damaged in shipping is the sellers responsibility. SNAD claims are ALWAYS decided in the buyers favor and all money is refunded by EBAY not the seller (they go and settle it with the seller later). In some cases a buyer will be asked to cover return shipping, which is fair, as you would pay to return an item elsewhere.

The bottom line is that the return policy is mandated by ebay's rules for selling, not the compliance of sellers with good practices and honesty.

Matthew Cherry · Aug 4, 2013

I wound up getting a K375 for $80. Hope it wasn't a mistake but I figure it should work.

Ken Nadvornick · Aug 4, 2013

If I recall, the only difference between the K250 that I have and a K375 (which is the next model the product line) is the minimum flow rate.

A standard K250 can go down to 0.5 gal/min while still holding the set temperature. My K250 was programmed with the "low flow" software option and can go down to 0.25 gal/min. This is useful for overnight wash cycles in my Versalab washer without overusing water. (Even though up here in the Pacific NW we have more water than we know what to do with!)

The K375 can go down to 1.0 gal/min. If that spec matches your requirements, then you're good to go.

Ken

Want to Buy Haas Intellifaucet D250 Wanted

Privacy & Transparency

Privacy & Transparency