Graded RC users?

Michel Hardy-Vallée · Jan 9, 2007

Just out of curiosity, are there any users of graded RC paper (Ilford, Kentmere, etc) around here? What advantages do you get from it instead of the more common VC RC?

firecracker · Jan 10, 2007

mhv said:
Just out of curiosity, are there any users of graded RC paper (Ilford, Kentmere, etc) around here? What advantages do you get from it instead of the more common VC RC?

I use Fuji Grade2 RC paper, and it's good when I only have one image to print and cannot decide the contrast myself, like when I'm not too familiar with the image and don't know how to cook it right.

It gives me good solid black at default, so if I want more gray, I mix my fresh developer (Dektol) with used one to weaken it or start using a second developer (Selectol Soft) to adjust.

dancqu · Jan 10, 2007

mhv said:
Just out of curiosity, are there any users of
graded RC paper (Ilford, Kentmere, etc) around here?
What advantages do you get from it instead of the
more common VC RC?

A real advantage Graded has over VC, FB or RC,
is a high level of darkroom lighting. Graded paper
has a blue sensitive emulsion. It is not green
sensitive. There are at least a few Graded
RC papers. If your safelights are set for
VC you'll need to change them to
take advantage. Dan

Jon Shiu · Jan 11, 2007

I have used Arista Graded RC paper to proof pyro developed negatives --gave better contrast than VC.

Jon

Michel Hardy-Vallée · Jan 15, 2007

Dan, I've been meaning to find a Kodak OA safelight or something similarly bright but they don't seem to be around much these days--only OC or red ones. Where would you get one nowadays?

Jon: interesting tip, is it because of the effect of the pyro stain?

Jon Shiu · Jan 15, 2007

Yes, in most cases with low/normal contrast scenes I got too flat highlights with Ilford MGIV VC. With graded paper, completely different tonality. I used WD2D+ from the Formulary, and mostly got thin negs and bad results, so gave it up.

Jon

dancqu · Jan 16, 2007

mhv said:
Dan, I've been meaning to find a Kodak OA safelight
or something similarly bright but they don't seem to be
around much these days--only OC or red ones.
Where would you get one nowadays?

Odd about those OAs. Never saw one till a few
years ago when I went eBay for the start up of
a many years away from darkroom. The very well
lighted darkroom of years gone by was in mind and
I remember the light was yellow. The OAs, of which
I have four very nice 5 1/4 inch Kodaks, are yellow
green. I'd like to give them a try but as my work
space took shape I found they would not fit in.

So, with some under cupboard wiring and sockets
I've now three in a row yellow-ish orange Kodak
Brownie B models. A Yankee with same color
filter installed does near the sink. The small
Kodaks have five watt miniture and the
Yankee a 15 and another 71/2 watt.

Shop ebay for, safelight, safe light, and darkroom
light. Also by brand and model. Dan

Jim Fitzgerald · Jan 16, 2007

Jon Shiu said:
Yes, in most cases with low/normal contrast scenes I got too flat highlights with Ilford MGIV VC. With graded paper, completely different tonality. I used WD2D+ from the Formulary, and mostly got thin negs and bad results, so gave it up.

Jon

Jon, what grades are you using to do your proofs? also, are you going to fiber for the final prints and what adjustments are you using? I shoot a lot of low contrast scenes and have recently started using Kentmere G-3 fiber for the prints. It looks very good. These are contact prints, 8x10. Are you enlarging? I heard that the Arista II is Kentmere. Maybe I should give it a try for proofing. Thanks for the info.

Jim

Jon Shiu · Jan 16, 2007

Hi, I am using arista graded RC gr 2 and 3 to proof 4x5 negs to 8x10 print. After selecting negs for final prints I use Ilford Gallerie grades 2, 3, 4 in 11x14 print size.

Jon

Matthew Gorringe · Jan 16, 2007

For any fine printing I use Ilford Gallerie. It really stands apart from the VC papers I've used in it's ability to give good seperation in the shadows and beautiful creamy, delicate highlights.

I also think it's easier for me to get a good fine print from Gallerie than it is with VC papers.

Jim Fitzgerald · Jan 19, 2007

Jon, thanks for the info. I'll give the Arista rc a try.

Jim

Graded RC users?

Michel Hardy-Vallée

Membership Council

firecracker

dancqu

Jon Shiu

Michel Hardy-Vallée

Membership Council

Jon Shiu

dancqu

Jim Fitzgerald

Jon Shiu

Matthew Gorringe

Jim Fitzgerald

Graded RC users?

Membership Council

Membership Council

Privacy & Transparency

Privacy & Transparency