alanrockwood
Member
- Joined
- Oct 11, 2006
- Messages
- 2,185
- Format
- Multi Format
I have two Luna Pro F light meters. Both fail the battery test when a fresh 9V battery is installed. The needle goes off-scale to the right of the green "BATT" box on the dial. I understand that some other people see the same thing. How common is this problem, and does this problem affect the meter calibration?
Interestingly, if I use a battery voltage of ~7.6 volts the meter passes the battery test, barely, though it is still on the high side of the "BATT" box. I did this diagnosis by temporarily putting two silicon diodes in series with the battery to get ~7.6 volts.
Alan
Interestingly, if I use a battery voltage of ~7.6 volts the meter passes the battery test, barely, though it is still on the high side of the "BATT" box. I did this diagnosis by temporarily putting two silicon diodes in series with the battery to get ~7.6 volts.
Alan