Free GONE: Free JOBO CPP2 for parts or repair - Auckland, NZ

[HamishKL]

Hi darkroom gear hounds, I never quite got around to repairing a nearly-working JOBO CPP2 processor that I've had lying around for years in my to-be-repaired pile. If anyone is near Auckland, New Zealand and would like to take it on as a project or to cannibalise for parts, you're welcome to it. I'm not going to ship it anywhere, as it's too big and impractical to transport via courier anyhow. All parts are here, but there are some fractured bits of plastic in crucial areas around the motor and pump housings, which have proven tricky to repair due to the stresses involved in normal operation. A battery pack on one of the circuit boards also leaked, but I've replaced that and hopefully repaired the circuit damage.

Questions welcome.

-Hamish

 

[MattKing]

Technically, this should be in the Classifieds, but the OP probably can't access that part due to low post count and not being a subscriber.
So I will look the other way for a bit for now, to reward generosity.

 

[HamishKL]

Technically, this should be in the Classifieds, but the OP probably can't access that part due to low post count and not being a subscriber.
So I will look the other way for a bit for now, to reward generosity.

Thank you Matt and sorry for the mis-post.

 

[MattKing]

Thank you Matt and sorry for the mis-post.

Thanks for subscribing. I'll move the thread to the Classifieds and set the "Free" flag.
I'll also alert Sean, in order to make sure that you will be able to (soon) access your own thread.

 

[Sean]

Thanks Hamish! & @MattKing for the assistance

 

[HamishKL]

Thanks for subscribing. I'll move the thread to the Classifieds and set the "Free" flag.
I'll also alert Sean, in order to make sure that you will be able to (soon) access your own thread.

Thanks very much Matt, really appreciated!