FX-39 back to stay!

ADOX Fotoimpex

Partner
Partner
Joined
Nov 20, 2005
Messages
886
Location
Berlin
Format
35mm RF

After Paterson had no interest in continuing the chemistry line we rememebered what we had promised Geoffrey Crawley about 10 years ago: "to keep his baby allive". Here he is again. We hope the 6 months interruption of supply has not led to escapades by its fans.

Stock will show by 6PM CET.

http://www.fotoimpex.de/shopen/chemistry/adox-fx-39-500ml.html
 

miha

Member
Joined
Feb 15, 2007
Messages
2,929
Location
Slovenia
Format
Multi Format
Thank you Mirko for your commitment to film photography!
 

dphill

Member
Joined
Sep 10, 2005
Messages
108
Location
Brownsville, OR
Format
35mm
I went to the site and was intrigued.
I've heard of fx39 before but never used it.
How well does it work Ilford pan 50?
 
OP
OP

ADOX Fotoimpex

Partner
Partner
Joined
Nov 20, 2005
Messages
886
Location
Berlin
Format
35mm RF
Pan F is probably one of the best combinations for FX 39 that you can think of.
The film is very fine grained so the only disadvantage of FX-39 (not to work super fine grain) is no issue and all the other parametes afectable by development (speed, sharpness, detail contrast, copy range) are handled by FX-39 in an almost perfect way.
So yes, these two will be a great match.
 

miha

Member
Joined
Feb 15, 2007
Messages
2,929
Location
Slovenia
Format
Multi Format
How do FX-39 and Rodinal compare?
 
OP
OP

ADOX Fotoimpex

Partner
Partner
Joined
Nov 20, 2005
Messages
886
Location
Berlin
Format
35mm RF
How do FX-39 and Rodinal compare?
Click to expand...
There are about 70 years inbetween.
Both developers are similar but FX-39 yields more speed utilisation and gives more equalizing "power" at a given speed.
You can achieve either one also with Rodinal but not simultaniously (special development methods excluded).
Basically Rodinal is closer to a "raw" developing substance and FX-39 is more of a tweaked formula.
Either one has it´s advantages/disadvantages.
Does this make sense to you?

Mirko
 
Last edited by a moderator:

Gerald C Koch

Member
Joined
Jul 12, 2010
Messages
8,131
Location
Southern USA
Format
Multi Format
miha said:
How do FX-39 and Rodinal compare?
Click to expand...

Depends on what you mean by compare. Chemically the two developers are quite different. This is not to say that each is not capable of producing good results.
 

Gerald C Koch

Member
Joined
Jul 12, 2010
Messages
8,131
Location
Southern USA
Format
Multi Format
miha said:
How do FX-39 and Rodinal compare?
Click to expand...

Depends on what you mean by compare. Chemically the two developers are very different. One has to be very careful what is said on APUG to avoid starting a rumor. This is not to say that each is not capable of producing good results.
 

StoneNYC

Member
Joined
Aug 5, 2012
Messages
8,345
Location
Antarctica
Format
8x10 Format
Uses a lot more develoer than Rodianl as well. Hmm wonder if it will be available at B&H Photo anytime soon. Looking for a sharper develoer than Rpdinal for Rotary Processors since I can't seem to get the sharpness I used to get from hand processing...
 
OP
OP

ADOX Fotoimpex

Partner
Partner
Joined
Nov 20, 2005
Messages
886
Location
Berlin
Format
35mm RF

Sharper than Rodinal is tough to achive. Stop using rotation. It´s inferior by any means. I wonder why people use rotary processors at all for B&W.
I am not very optimistic about B&H stocking our products. The chain gets to long and the price to high.
Apart from this analog does not seem to be in their main scope anymore.
 

miha

Member
Joined
Feb 15, 2007
Messages
2,929
Location
Slovenia
Format
Multi Format
ADOX Fotoimpex said:
Does this make sense to you?

Mirko
Click to expand...

Well, not really From a marketing standpoint of view they look very similar, Schärfesteigernder Enwickler on both bottles. And since I prefer the tonality of Neofin to Rodinal I think I might prefer Crawley's brew.
 

StoneNYC

Member
Joined
Aug 5, 2012
Messages
8,345
Location
Antarctica
Format
8x10 Format

I only JUST started rotary processing... I keep seeing that many prefer it... Why is it inferior?
 
OP
OP

ADOX Fotoimpex

Partner
Partner
Joined
Nov 20, 2005
Messages
886
Location
Berlin
Format
35mm RF
Why is it inferior?
Click to expand...

The problem is the constant agitation. Stand development would be the opposite. The reason why you inverse the tank only after a certain timespan is so that the developer physically exhausts itself in areas where the film has been hit by more light. So the further development/darkening of these areas is prohibited to a certain extend until you inverse again and fresh developer is being brought in. This leads to a better speed utilisation and higher compensation (you can develop longer without the lights blowing out). Sharp edges (Kantenschärfe) are also produced by this effect because the opposite effect takes place on the edge (not exhausted developer from the areas where the film has been hit by little light spreads a bit into the darker areas causing the edges to darken more than the actual area.

I have to close again with the question if this makes sense (my english seems to degrade)

Mirko
 

StoneNYC

Member
Joined
Aug 5, 2012
Messages
8,345
Location
Antarctica
Format
8x10 Format
Your English is better than my ability to speak your language

Most makes sense, except the end with the edges, are you saying stand is SHARPER but causes more grain? Or that rotary is sharper and causes more grain (which some think is bad?) I found that rotary "blurs" the edges but have only used Rodinal in Rotary so far ... Is this incorrect?
 

Roger Cole

Subscriber
Joined
Jan 20, 2011
Messages
6,069
Location
Atlanta GA
Format
Multi Format
Your English is fine but many of us have tried both and simply don't agree with you.

If times are adjusted for the same contrast, I can't tell the difference between my rotary developed negatives and inversion developed negatives. Well, except that the rotary ones are never, ever, uneven (exception - I've had some problems with 4x5 in the 2509n reels and tanks lately that I didn't use to have. For some important negatives I went back to deep tanks and hangars.) But once I went rotary my rollfilm has never gone back, except for Diafine which doesn't need the temperature control and recommends only very gentle agitation.)

This is with conventional developers - mostly T-Max RS and D76 1+1 in my case. I have not tried rotary with Rodinal. I didn't like Rodinal in conventional processing (I know, I'm a heretic, but no matter what I did it just looked weird in a way I didn't like) so I gave it up a long time ago. I have some more to experiment with again when I get the urge.
 

Kevin Caulfield

Subscriber
Joined
Aug 3, 2004
Messages
3,845
Location
Melb, Australia
Format
Multi Format
Mirko, thanks for bringing back FX-39. So, you have the recipe? What's in it?
Hopefully it will be available in Australia.
 

miha

Member
Joined
Feb 15, 2007
Messages
2,929
Location
Slovenia
Format
Multi Format
Anchell and Troop say similar thing as Mirko of Fotoimpex.
 
OP
OP

ADOX Fotoimpex

Partner
Partner
Joined
Nov 20, 2005
Messages
886
Location
Berlin
Format
35mm RF
are you saying stand is SHARPER but causes more grain?
Click to expand...

This is more a question of which developer you use. Sharpness usually comes together with grain. This the common way of perceiption by humans.

Rotary has little effect on grain. The only difference between stand/inversion and rotary is this local exhaustion phenomen which shields the highlights a bit and causes the edge effect.

@ Roger: With D76 or ID 11 you will most probably see no big differences as these developers do not work sharpness increasing and have a very large equalizing power. So with these developers the above described effect is lowered to an extend that it probably can be neglected.
The effect is most visible in one shot-high dilution developers and not with a strong stock solution brew.

With Rodinal and a non tabular film, many people do see it.

But I am not on a mission here against rotation. Just pointing out what I know.

The advantage of controled development might outrun the disadvantage of 1/3rd of a stop of speed difference. Especially when you work the zone system and compensate it with exposure.

There is also a controled inversion processor: The wonderful Heiland TAS http://www.fotoimpex.de/shopen/dark...puter-controlled-inversion-of-jobo-tanks.html

We use the above in or testlab.
 

Roger Cole

Subscriber
Joined
Jan 20, 2011
Messages
6,069
Location
Atlanta GA
Format
Multi Format
I can see that. Having learned before anyone heard of (or at least wrote about) "stand" development I still find that a bit odd. When I want compensation I typically use Diafine (my standard developer for Pan F+ for example.) And no, I don't use it for rotary development. My negatives are sharp enough for me, and I mostly control highlights with conventional minus development unless they are really extreme.
 
OP
OP

ADOX Fotoimpex

Partner
Partner
Joined
Nov 20, 2005
Messages
886
Location
Berlin
Format
35mm RF
Having learned before anyone heard of (or at least wrote about) "stand" development I still find that a bit odd
Click to expand...

In my lab I have a brochure about stand development which was written in 1914 if I recall right (for sure before WW had ended). I bought it in a Vienna antique shop 10 years ago.
It makes reference to Rodinal and I think it was written by Agfa in Berlin Kreuzberg SO 36.
Before they moved to Rummelsburg they were located in Kreuzberg. Then they moved to Wolfen, then partially to Leverkusen, you know the rest...

I am sure your negatives are more than fine Roger. If you control highligts and compensate by a bit with extra exposure and control your process you will have perfect negs, for sure better than those of 95% of the others.

On the other hand however someone who´s new to the business and does not know about all these things is well off with a developer which yields the speed (most cameras tend to underexpose), equalizes the negative contrast and gives him a bit of sharpness and grain for the classic look.
He´ll most likely be using a simple tank with less options of control than you have so the equalizing effect of the "stand development" (it really isn´t yet) adds a bit of a bonus for him.
So FX-39 will hoepfully find his fans and you please stick to Diafine

Mirko
 

Roger Cole

Subscriber
Joined
Jan 20, 2011
Messages
6,069
Location
Atlanta GA
Format
Multi Format
Ok, no one was writing about it in the photography magazines and books I was reading at the time.

I'm not against FX-39, don't get me wrong. I may well give it a try. I just do really like my Jobo.
 

JamesMorris

Subscriber
Joined
Sep 29, 2009
Messages
57
Location
Seattle, WA
Format
Large Format
How does it compare with DD-X for tabular grain films?

Also hoping to see this available in Australia.
 

Barry Kirsten

Member
Joined
Jan 19, 2014
Messages
68
Location
Brookfield, Vic. Au.
Format
Multi Format
Thanks Kevin, good to know. It doesn't surprise me really. I've been disappointed so many times by Van Bar, availability of stock, price etc, but where else do you go in Australia? For several years now I've been using Freestyle, B&H, Photographer's Formulary etc. especially when the AU$ was strong.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…